Configure an SD-WAN Policy Rule
Configure an SD-WAN policy rule to determine how the firewall selects a path for session load and for when the health of the preferred path deteriorates.
An SD-WAN policy rule specifies application(s) and/or service(s) and a traffic distribution profile to determine how the firewall selects the preferred path for an incoming packet that doesn’t belong to an existing session and that matches all other criteria, such as source and destination zones, source and destination IP addresses, and source user. The SD-WAN policy rule also specifies a path quality profile of thresholds for latency, jitter, and packet loss. When one of the thresholds is exceeded, the firewall selects a new path for the application(s) and/or service(s).
When monitoring your SD-WAN traffic, traffic originating from a source behind the hub device is evaluated against the SD-WAN policies pushed to the hub device as it enters the hub device, and because the path selection decision has already been made, the branch device does not evaluate the traffic against its SD-WAN policies as it passes through the branch device to the final target device. Conversely, traffic originating from a source behind the branch device is evaluated against the SD-WAN policies pushed to the branch device and not by hub device. The Panorama™ management server aggregates the logs from both the hub and branch, and for the same traffic, two session entries are displayed but only the SD-WAN device that originally evaluated the traffic contains the SD-WAN details.
In an SD-WAN policy rule, you can reference an Error Correction profile so that you can apply Forward Error Correction (FEC) or packet duplication for specified critical applications that have a low tolerance for dropped or corrupted packets.
In an SD-WAN policy rule, you also specify the devices to which you want Panorama to push the rule.
- Selectand select the appropriate device group from thePoliciesSD-WANDevice Groupcontext drop-down.
- Addan SD-WAN policy rule.
- On theGeneraltab, enter a descriptiveNamefor the rule.
- On theSourcetab, configure the source parameters of the policy rule.
- Add theSource Zoneor selectAnysource zone
- Addone or more source addresses, set an external dynamic list (EDL), or selectAnySource Address.
- Addone or more source users or selectanySource User.
- On theDestinationtab, configure the destination parameters of the policy rule.
- AddtheDestination Zoneor selectAnydestination zone.
- Addone or more destination addresses, set an EDL, or selectAnyDestination Address.
- On theApplication/Servicetab, attach your SD-WAN Link Management profiles and specify your applications and services.PAN-OS 10.0.2 supports associating only a SaaS Quality Profile or an Error Correction but not both. If you associate one of these profiles with an SD-WAN policy rule, you cannot associate the other.For example, if you associate a SaaS Quality profile with an SD-WAN policy rule, you are unable to associate an Error Correction profile with the same SD-WAN policy rule.
- Select thePath Qualityor Create a Path Quality Profile.
- Select theSaaS Quality Profileor Create a SaaS Quality Profile if the branch firewall has a Direct Internet Access (DIA) link to a SaaS application. The default isNone (disabled).
- Select theError Correction Profileor Create an Error Correction Profile to apply forward error correction (FEC) or packet duplication to the applications that match the SD-WAN policy rule. The default isNone (disabled).
- Add Applicationsand select one or more applications from the list or selectAnyapplications. All applications you select are subject to the health thresholds specified in the Path Quality profile you selected. If a packet matches one of these applications and that application exceeds one of the health thresholds in the Path Quality profile (and the packet matches the remaining rule criteria), the firewall selects a new preferred path.Add only business-critical applications and applications that are sensitive to path conditions for their usability.If you associate a SaaS Quality profile inAdaptivemode with the SD-WAN policy, add the specific SaaS applications you want to monitor. Using adaptive monitoring for all applications that match the SD-WAN policy rule may impact the performance of the SD-WAN firewall.If you associate a SaaS Quality profile with a specified SaaS application, add the SaaS application to the SD-WAN rule to ensure the SaaS monitoring settings are applied only to the desired SaaS application.
- Add Servicesand select one or more services from the list or selectAnyservices. All services you select are subject to the health thresholds specified in the Path Quality profile you selected. If a packet matches one of these services and that service exceeds one of the health thresholds in the Path Quality profile (and the packet matches the remaining rule criteria), the firewall selects a new preferred path.Add only business-critical services and services that are sensitive to path conditions for their usability.
- On thePath Selectiontab, select aTraffic Distributionprofile or Create a Traffic Distribution Profile. When an incoming packet (unassociated with a session) matches all the match criteria in the rule, the firewall uses this Traffic Distribution profile to select a new preferred path.
- On theTargettab, use one of the following methods to specify the target firewalls in the device group to which Panorama pushes the SD-WAN policy rule:
- SelectAny (target to all devices)(the default) to push the rule to all devices. Alternatively, selectDevicesorTagsto specify the devices to which Panorama pushes the SD-WAN policy rule.
- On theDevicestab, select one or more filters to restrict the selections that appear in the Name field; then select one or more devices to which Panorama pushes the rule, as in this example:
- On theTagstab,Addone or moreTagsand select the tag(s) to specify that Panorama push the rule to devices that are tagged with the selected tags, as in this example:
- If you specified Devices or Tags, you can selectTarget to all but these specified devices and tagsto have Panorama push the SD-WAN policy rule to all devices except for the specified devices or tagged devices.
- CommitandCommit and Pushyour configuration changes.
- (Best Practice) Create a catch-all SD-WAN policy rule to Distribute Unmatched Sessions so that you can control which links any unmatched sessions use and view unmatched sessions in logging and reports in the SD-WAN plugin.If you don’t create a catch-all rule to distribute unmatched sessions, the firewall distributes them in round-robin order among all available links because there is no traffic distribution profile for unmatched sessions. Round-robin distribution of unmatched sessions can increase your costs unexpectedly and result in loss of application visibility.
- After configuring your SD-WAN policy rules, Create a Security Policy Rule to allow traffic (for example,bgpas anApplication) from branches to the internet, from branches to hubs, and from hubs to branches.
- (Optional) Configure QoS for critical applications.If the SD-WAN applications need guaranteed bandwidth capacities or if you do not want other applications taking bandwidth from critical business applications, create QoS rules to control the bandwidth properly.
- To automatically set up BGP routing between VPN cluster members, in the SD-WAN plugin, Configure BGP routing between branches and hubs to dynamically route traffic that will be subject to the SD-WAN failover and load sharing.Alternatively, if you want to manually configure BGP routing on each firewall or use a separate Panorama template to configure BGP routing (for more control), leave the BGP information in the plugin blank. Instead, configure BGP routing.
- Configure NAT for public-facing virtual SD-WAN interfaces.
Recommended For You
Recommended videos not found.