Autonomous DEM
Monitor Site Experience
Table of Contents
Monitor Site Experience
The Sites tab in NetSec Health dashboard provides a unified view of
Prisma SD-WAN and third-party sites connected across the network.
| Where Can I Use This? | What Do I Need? |
|---|---|
| One of these:
|
The Sites tab in NetSec Health dashboard provides a unified
view of Prisma SD-WAN and third-party sites connected across the network. It
displays a map view of sites and data centers connected to remote networks and
provides detailed metrics of on-site connectivity and experience scores across
networks. This enables you to monitor the status of your remote sites and data
centers.
This dashboard shows the number of configured sites in your deployment. The
number enclosed in parenthesis is the total number of connected sites and the number
to the right is the number of sites that are up with Good experience scores. Sites
are considered based on score for SD-WAN or tunnel status and incidents.
The blue line chart indicates the trend of average experience score for all
sites over time. Below the configured sites, you see the number of sites with
experience scores as Good/Fair/Poor along with the number of incidents for all
sites. You can filter the data by Sites only, Sites and Data Centers,
or Sites and Prisma Access Locations.
If you have Juniper Mist integrated third-party sites,
you will see Juniper Mist sites in the dashboard. To know more about the
integration, refer to Juniper Mist Integration.
Sites - Map View Interaction
You can drill down to a specific site to know the site details such as the PA
location, DC connected to, standard VPN, secure fabric, and any open incidents.
It also displays flight paths on the map that shows the connections from
that site to other locations like a PA gateway or another data center. The color
of the path indicates the health of the destination.
Degraded Site Experience
This panel displays the data by Incidents and Segments. Incidents for Prisma
SD-WAN, Juniper Mist are categorized into infrastructure, network services, data
centers, and third- party sites. You can further drill down to a specific
incident by selecting the incident you want to investigate.
Site Experience Trends
If you have AI-Powered ADEM enabled, you can view site experience trend.
Click the Experience Trends to view a time series, followed by the
end-to-end topology chart for Prisma SASE sites.
