PA-400 Series Back Panel
Table of Contents
PA-400 Series Back Panel
Learn about the PA-400 Series firewall back-panel components.
View the back panel components of your PA-400 Series firewall.
The following image shows the back panel of the PA-410 and the table
describes each back panel component.
| Item | Component | Description |
|---|---|---|
|
1
|
Power adapter input
|
Use the power input to connect power to the firewall. The PA-410
ships with one 25W power adapter.
Use only the PA-400 Series external power adapters provided by
Palo Alto Networks.
|
|
2
|
Ground stud
|
Use the single post ground stud to connect the firewall to earth
ground (ground cable not included).
|
|
3
|
Power Cord Retainer
|
Use the power cord retainer to secure the power cord.
|
The following image shows the back
panel of the PA-415-5G and the table describes each back panel component.
| Item | Component | Description |
|---|---|---|
|
1
|
Antenna Connector
|
Four antenna connectors:
Two antenna connectors are on the back panel
of the device and two antenna connectors are on the PA-400 Series Front Panel. |
|
2
|
SIM slots
|
Two SIM slots for cellular network connectivity.
|
|
3
|
Ground stud
|
Use the single post ground stud to connect the firewall to earth
ground (ground cable not included).
|
The back panels of the PA-415 and PA-445 firewalls are visually
different but feature the same components. The following image shows the back panel of
the PA-415 and the table describes each back panel component.
| Item | Component | Description |
|---|---|---|
|
1
|
Ground stud
|
Use the single post ground stud to connect the firewall to earth
ground (ground cable not included).
|
The following image shows the back panel of the
PA-455. There are no serviceable components on the back panel.
The following image shows the back panel of the
PA-455-5G and the table describes each back panel component.
| Item | Component | Description |
|---|---|---|
|
1
|
Antennas
|
Four antenna slots per modem that provide 5G connectivity to the
device. The firewall does not ship with antennas.
|
|
2
| Fan |
A single dual-motor fan that provides cooling to the firewall.
|
The back panels of the PA-440, PA-450, and PA-460 firewalls are
identical. The following image shows the back panel of the PA-440 and the table
describes each back panel component.
| Item | Component | Description |
|---|---|---|
1 | Ground stud | Use the single post ground stud to connect
the firewall to earth ground (ground cable not included). |
2 | Power adapter inputs (PWR 1 and PWR 2) | Use the power inputs to connect power to
the firewall. The PA-440, PA-450, and PA-460 ship with one 50W power
adapter. A second adapter can be used for redundancy. Use
only the PA-400 Series external power adapters provided by Palo
Alto Networks. |
To view system firmware versions for any of the PA-400
Series firewalls, use the following CLI command:
admin@PA-400> show system firmware