: Third-party Integrations Using a Full-featured XSOAR Server
Focus
Focus

Third-party Integrations Using a Full-featured XSOAR Server

Table of Contents

Third-party Integrations Using a Full-featured XSOAR Server

Set up a full-featured Cortex XSOAR server for IoT Security integration with third-party solutions.
IoT Security can integrate with third-party systems through a full on-premises or cloud-hosted Cortex XSOAR server running Cortex XSOAR version 6.8–6.12 and 8.0 (Cortex XSOAR NG). This option supports the same IoT Security integrations as the cohosted version but doesn’t require the purchase of an IoT Security Third-party Integrations Add-on license. In addition, the full-featured Cortex XSOAR product allows you to create and modify third-party integration playbooks, unlike the cohosted, purpose-built XSOAR service, which has preconfigured playbooks that can't be modified.
The following instructions for setting up IoT Security and a full-featured XSOAR server assume that you’ve already installed an XSOAR server on your network or in the cloud and that you are now preparing it to provide third-party integration opportunities for IoT Security. IoT Security supports third-party integrations through XSOAR servers running Cortex XSOAR version 6.8–6.12 and version 8.0 (Cortex XSOAR NG).
For FedRAMP compliance, the on-premises XSOAR server must be running a vendor-approved FIPS version that complies with the FIPS 140-2 standard.
  1. Choose a Cortex XSOAR server for IoT Security to use for third-party integrations.
    1. Log in to the IoT Security portal, select Integrations.
      If you have not bought and activated an IoT Security Third-Party Integrations Add-on license, two options appear on the Integrations page.
    2. Select Integrate through a full-featured Cortex XSOAR server and then Save.
      IoT Security takes a few minutes to prepare to use a Cortex XSOAR server for third-party integrations. When done, the Integrations page changes to show XSOAR installation settings and a list of the steps for setting up third-party integrations through a full-featured XSOAR server.
      After you save your selection, a button appears in the upper right of the page: Switch integration methods. If you have both a full-featured Cortex XSOAR server and an IoT Security Third-party Integrations Add-on license, you can switch between the XSOAR server and the cohosted XSOAR instance. However, you can only use one method at a time.
  2. Download the IoT Security Content Pack.
    On the Integrations page, download the IoT Security content pack as a .zip file.
    Do not download and attempt to use the IoT Security content pack from the Cortex XSOAR marketplace. It isn't current and doesn't support all the third-party integrations that the content pack available from the IoT Security portal does. Only download and use the content pack from the IoT Security portal.
  3. Create an API access key and then download the key and key ID.
    If you have the text file for a currently active API access key, you can use that instead of creating a new API access key.
    1. On the Integrations page in IoT Security, click Create under API Access Key.
    2. In the Create Access Key dialog box, click Create again.
    3. In the Access Key Created dialog box, Download the access key and key ID as a text file.
  4. Copy the IoT Security tenant URL.
  5. Configure the Cortex XSOAR server.
    Log in to the Cortex XSOAR server, upload the content pack, and use your IoT Security tenant URL, API access key, and key ID to configure the "Palo Alto Networks IoT 3rd Party" integration instance.
    1. Log in to the XSOAR server using credentials for a user account with administrator privileges, which let you upload the IoT Security content pack.
    2. Cortex XSOAR version 6.8–6.12 Because the IoT Security content pack is not provided by Cortex XSOAR, set content pack verification to false. Select SettingsAboutTroubleshooting, enter false in the content.pack.verify field in the Server Configuration section, and then Save.
      or
      Cortex XSOAR version 8.0 Because IoT Security provides the content pack instead of Cortex XSOAR, it cannot be verified. Therefore, to upload it without a verification check, select Settings & InfoServer Settings and then either drag-and-drop the content pack file onto Upload custom content in the Custom Content section or browse to the content pack file and upload it.
    3. Cortex XSOAR version 6.8–6.12 On the XSOAR server, navigate to the Marketplace, click the three vertical dots icon in the upper right, and then Upload Content Packs.
    4. Cortex XSOAR version 6.8–6.12 Select the previously downloaded IoT Security content pack for XSOAR to upload and install.
    5. Select Settings, search for palo alto networks iot 3rd party, and then click Add instance to open the settings panel.
    6. Enter the following and leave other settings at their default values:
      Name: Use the default name (Palo Alto Networks IoT 3rd Party_instance_1) or enter a new one.
      IoT Security Tenant URL: Copy this from the Integrations page in IoT Security and paste it here.
      Access Key: Copy this from the API access key file you downloaded and paste it here.
      Key ID: Copy this from the API access key file you downloaded and paste it here.
      Long running instance: (select; this maintains a session between the XSOAR server and IoT Security, using a regular heartbeat mechanism to monitor connectivity)
      Single engine: Choose No engine.
    7. Test the integration instance settings.
      When finished, click Test. If the test is successful, a Success message appears and Cortex XSOAR and IoT Security have established a link. If not, check that the settings were entered correctly and then test the configuration again.
    8. Click Save & exit to save your changes and close the settings panel.
  6. Cortex XSOAR version 8.0 and later If the IoT Security content pack incident fields don't appear in the job creation page, create a customized incident layout in Cortex XSOAR.
    When running Cortex XSOAR version 8.0 and later, the IoT Security third-party content pack custom fields may not appear in the job creation page. Create an incident layout, assign it to a custom incident type for third-party integrations, and add the the customized incident type to all IoT Security third-party integration jobs that you create.
    1. Navigate to Settings & InfoSettingsObject SetupIncidentsLayouts. This brings up the table of incident layouts.
    2. Select + New Layout"New"/"Edit" Form to create a new layout.
    3. Enter a descriptive name for the layout for IoT Security third-party integrations.
    4. From the Library in the left-side panel, add fields into the Custom Fields box in the right-side panel by dragging and dropping. Drag and drop the following fields.
      • Asset Attribute Polling IP/Subnet
      • Automatically Synchronize Scanners with IoT Security
      • Bulk Export Interval (Days)
      • Cisco Meraki Networks
      • Cisco Meraki Organizations
      • Custom IPAM Data List Name
      • ExtremeCloud IQ SE End-System Custom Attributes
      • Import Aruba Central wired client details to IoT Security
      • Import IPAM site definitions to IoT Security
      • Import vulnerabilities by CVE severity levels
      • Integration Instance Name
      • ip
      • IPAM subnet Data Overwrite
      • jobid
      • Network Discovery Skip Neighbor Discovery Patterns
      • PANW IoT Device Custom Attributes
      • PANW IoT In Scope Tag Enforcement
      • PANW-ServiceNow-Category-Map
      • Playbook Poll Interval
      • Polling Duration in days
      • Primary Active Instance Name
      • Primary Instance Name(s)
      • Primary Standby Instance Name
      • profileid
      • Rockwell AssetCentre Asset Property UUIDs
      • Rockwell AssetCentre Asset Type UUIDs
      • Run Once
      • scannerid
      • Secondary Active Instance Name
      • Secondary Instance Name(s)
      • Secondary Standby Instance Name
      • ServiceNow Discovered IoT Device Table Name
      • ServiceNow-IoT Device Category
      • ServiceNow-IoT Device Model
      • ServiceNow-IoT Device OS
      • ServiceNow-IoT Device Profile
      • ServiceNow-IoT Device Site
      • ServiceNow-IoT Device SSID
      • ServiceNow-IoT Device Supported OS
      • ServiceNow-IoT Device Tag
      • ServiceNow-IoT Device Vendor
      • ServiceNow-IoT Device VLAN
      • ServiceNow-IoT Wired/Wireless Device
      • Site Names
      • siteid
      • Splunk Index
      • Splunk Source Type
      • Use IPAM non-site data if the same block or subnet is in IoT Security
      • Use IPAM site data if the same root block is in IoT Security
    5. Select Save Version. This takes you back to the Layouts table.
    6. Navigate to Types and then select + New Incident Type. This brings up the New Incident Type dialog box.
    7. Enter a Name, and then under Layout select the layout you just created. Save the new incident type to close the dialog box.
    8. Make note of the name of your incident type. You will need to assign the incident type to all IoT Security thid-party integration jobs that you create.
  7. Configure IoT Security third-party integrations.
    After you’ve installed a content pack for IoT 3rd party integrations, you can begin configuring integrations with third-party systems. For IoT Security and Cortex XSOAR to integrate with a third-party system, you must configure XSOAR with an integration instance specifying connection settings and a job running a playbook over the connection.
    The following is a list of the jobs and their configuration elements for the third-party integrations that IoT Security supports. For detailed configuration instructions, see the section for specific integrations in this guide.
    Although the integration instructions later in this guide assume that you’re using a cohosted XSOAR module, the configuration instructions for the integration instances and jobs are similar for both cohosted deployments and full-featured Cortex XSOAR server deployments.
    Asset Discovery
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - Rockwell AssetCentre
    Import Rockwell AssetCentre assets to PANW IoT cloud
    Yes
    Required: "Integration Instance Name"
    Optional: "Poll Interval" (If not set, playbook imports all devices.)
    Imports devices from Rockwell Automation AssetCentre to IoT Security
    Set up IoT Security and XSOAR for AssetCentre Integration
    PANW IoT 3rd Party Integration - Asset Attribute Polling
    Bulk Import Asset Attributes Using Asset Attribute Polling - PANW IoT 3rd Party Integration
    No
    Required: "Integration Instance Name" and "Device Polling IP address/Subnet"
    Imports device attributes using asset attribute polling.
    Learn Device Attributes by Polling
    Asset Management
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - AIMSExport AIMS maps and devices to PANW IoTYesNo arguments required. Only a single instance is supported.Exports AIMS facilities, vendors, employees, work order priority list mappings, and device data to IoT Security. Set up IoT Security and XSOAR for AIMS Integration
    PANW IoT 3rd Party Integration - AIMSExport AIMS assignee and priority lists to PANW IoTYesNo arguments required. Only a single instance is supported.Exports the assignee list and work order priority list from AIMS to IoT Security. Set up IoT Security and XSOAR for AIMS Integration
    PANW IoT 3rd Party Integration - Microsoft SCCMImport Microsoft SCCM devices to PANW IoT cloudYesRequired: "Integration Instance Name"Fetches available endpoint data from a Microsoft SCCM SQL server and sends it to IoT Security. Set up IoT Security and XSOAR for SCCM Integration
    PANW IoT 3rd Party Integration - NuvoloBulk Export Devices to Nuvolo - PANW IoT 3rd Party IntegrationNoNo arguments required. Only a single instance is supported.Retrieves all devices from IoT Security and sends it to a third-party integration instance. Set up IoT Security and XSOAR for Nuvolo Integration
    PANW IoT 3rd Party Integration - NuvoloBulk Import Devices from Nuvolo to PANW IoT Cloud - PANW IoT 3rd Party IntegrationNoNo arguments required. Only a single instance is supported.Retrieves all devices from the Nuvolo instance and sends them to IoT Security.Although this job is prebuilt on a cohosted XSOAR instance, it must be manually created on a full-featured XSOAR server.
    PANW IoT 3rd Party Integration - NuvoloIncremental Export Devices to Nuvolo - PANW IoT 3rd Party IntegrationYesNo arguments required. Only a single instance is supported. The fixed poll interval is 15 minutes.Retrieves devices from IoT Security and sends them to the third-party integration instance.Although this job is prebuilt on a cohosted XSOAR instance, it must be manually created on a full-featured XSOAR server.
    PANW IoT 3rd Party Integration - ServiceNow v2Incremental Export Devices to ServiceNow - PANW IoT 3rd Party IntegrationYesNo arguments required. Only a single instance is supported. The fixed poll interval is 15 minutes.Retrieves devices discovered by IoT Security and sends them to a third-party integration instance. Set up IoT Security and XSOAR for ServiceNow Integration
    PANW IoT 3rd Party Integration - ServiceNow v2Bulk Export Devices to ServiceNow - PANW IoT 3rd Party IntegrationNoNo arguments required. Only a single instance is supported.Retrieves all devices from IoT Security and sends them to a third-party integration instance. Set up IoT Security and XSOAR for ServiceNow Integration
    Endpoint Protection
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - Cortex XDR - IRIncremental Export of Cortex XDR - PANW IoT 3rd Party IntegrationYes
    Required: "Integration Instance Name"
    Optional: "Site Names", and "Playbook Poll Interval"
    Retrieves active devices found by IoT Security, queries Cortex XDR to get associated device attributes, and reports the data to IoT Security. Filters for active devices: Site names and playbook poll interval. Set up IoT Security and XSOAR for XDR Integration
    PANW IoT 3rd Party Integration - CrowdStrike FalconIncremental Import of CrowdStrike Falcon - PANW IoT 3rd Party IntegrationNo
    Required: "Integration Instance Name"
    Optional: "Site Names", and "Playbook Poll Interval"
    Retrieves active devices found by IoT Security, queries CrowdStrike Falcon to get associated device attributes and reports the data to IoT Security. Filters for active devices: Site names and playbook poll interval. Set up IoT Security and XSOAR for CrowdStrike Integration
    PANW IoT 3rd Party Integration - Tanium
    Import Tanium Vulnerabilities to PANW IoT cloud
    Yes
    Required: "Integration Instance Name"
    Optional: "Import vulnerabilities by CVE severity levels"
    Imports vulnerabilities from Tanium to the IoT Security.
    Set up IoT Security and XSOAR for Tanium Integration
    Network Management
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - Aruba AirWave Import Aruba AirWave VisualRF Floor Plans to PANW IoT YesRequired: "Integration Instance Name" Retrieves floor plan maps from Aruba AirWave to IoT Security. Set up IoT Security and Cortex XSOAR for Aruba AirWave Integration
    PANW IoT 3rd Party Integration - Aruba AirWave Import Aruba AirWave VisualRF Clients to PANW IoT YesRequired: "Integration Instance Name" Retrieves asset and devince information from Aruba AirWave to IoT Security. Set up IoT Security and Cortex XSOAR for Aruba AirWave Integration
    PANW IoT 3rd Party Integration - Aruba CentralImport Aruba Central devices to PANW IoT cloudYes
    Required: "Integration Instance Name"
    Optional: “Import Aruba Central wired client details to IoT Security
    Retrieves client details from Aruba Central. By default, only wireless device details are retrieved. You have the option to retrieve details for both wired and wireless devices Set up IoT Security and XSOAR for Aruba Central Integration
    PANW IoT 3rd Party Integration - cisco-dnac-IoTextract-dnac-clientsYes
    Required: "Integration Instance Name"
    Optional: "Site Names" and "Playbook Poll Interval"
    Retrieves active devices found by IoT Security, queries Cisco DNA Center to get associated device attributes, and reports the data to IoT Security. Filters for active devices: Site names and playbook poll interval. Set up IoT Security and XSOAR for DNA Center Integration
    PANW IoT 3rd Party Integration - Cisco Meraki CloudGet Cisco Meraki Cloud Organizations and Networks - PANW IoT 3rd Party IntegrationNoRequired: "Integration Instance Name"Retrieves Cisco Meraki Cloud organizations and networks. Set up IoT Security and XSOAR for Cisco Meraki Cloud
    PANW IoT 3rd Party Integration - Cisco Meraki CloudImport Cisco Meraki Cloud Network Clients - PANW IoT 3rd Party IntegrationYes
    Required: "Integration Instance Name"
    Optional: "Cisco Meraki Networks"
    Optional: "Cisco Meraki Organizations"
    Optional: "Poll Interval" (Range: 1-31 days, default: 31)
    Imports all the Cisco Meraki Cloud clients to IoT Security. Set up IoT Security and XSOAR for Cisco Meraki Cloud
    PANW IoT 3rd Party Integration - Cisco PrimeCisco Prime ClientsYes
    Required: "Integration Instance Name"
    Optional: "Site Names" and "Playbook Poll Interval"
    Retrieves active devices found on IoT Security, queries Cisco Prime to get associated device attributes, and reports the data to IoT Security. Filters for active devices: Site names and playbook poll interval. Set up IoT Security and XSOAR for Cisco Prime Integration
    PANW IoT 3rd Party Integration - SNMPIncremental SNMP data import to PANW IoT Cloud - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Performs an SNMP crawl, retrieves all available endpoint data, and reports it to IoT Security. Set up IoT Security and Cortex XSOAR for SNMP Discovery
    PANW IoT 3rd Party Integration - Network DiscoveryNetwork Discovery - Export Devices using SNMPYes
    Required: "Integration Instance Name"
    Optional: Network Discovery Skip Neighbor Discovery Patterns
    Performs an SNMP crawl, retrieves all available L2, L3, and endpoint data and reports it to IoT Security. Set up IoT Security and Cortex XSOAR for Network Discovery
    IP Address Management
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - BlueCat IPAMBulk Import of subnet network info from BlueCat IPAM to PANW IoT CloudYesRequired: "Integration Instance Name"Fetches available IPAM data from a BlueCat Address Manager and sends it to IoT Security. Set up IoT Security and XSOAR for BlueCat Integration
    PANW IoT 3rd Party Integration - Infoblox IPAMBulk Import of subnet network info from Infoblox IPAM to PANW IoT CloudYesRequired: "Integration Instance Name"Fetches available IPAM data from an Infoblox Grid Master and sends it to IoT Security. Set up IoT Security and XSOAR for Infoblox Integration
    Wireless Network Controllers
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - Aruba WLAN ControllerImport Aruba WLC devices to PANW IoT cloudYesRequired: "Integration Instance Name"Fetches available endpoint data from an Aruba WLAN controller and sends it to IoT Security. Set up IoT Security and XSOAR for Aruba WLAN Controllers
    PANW IoT 3rd Party Integration - Cisco WLAN ControllerImport Cisco WLC devices to PANW IoT cloudYesRequired: "Integration Instance Name"Fetches available endpoint data from a Cisco WLAN controller and sends it to IoT Security. Set up IoT Security and XSOAR for Cisco WLAN Controllers
    Security Information and Event Management
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - Syslog SenderBulk Export to SIEM - PANW IoT 3rd Party IntegrationNoRequired: "Integration Instance Name"Retrieves all devices, alerts, and vulnerabilities from IoT Security and sends them to a third-party integration instance. Set up IoT Security and XSOAR for SIEM Integration
    PANW IoT 3rd Party Integration - Syslog SenderIncremental Export to SIEM - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name". Default poll interval is 15 minutes.Retrieves devices, alerts, and vulnerabilities from IoT Security and sends them to a third-party integration instance.Although this job is prebuilt on a cohosted XSOAR instance, it must be manually created on a full-featured XSOAR server.
    Network Access Control
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - Aruba ClearPassIncremental Export to Aruba ClearPass- PANW IoT 3rd Party IntegrationYes
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Playbook Poll Interval", "Site Names", and "PANW IoT In Scope Tag Enforcement".
    Retrieves devices from IoT Security and sends it to a third-party integration instance. Filters for IoT Security devices: Custom attributes, poll interval, site names, and tag enforcement. Set up IoT Security and XSOAR for ClearPass Integration
    PANW IoT 3rd Party Integration - Aruba ClearPassBulk Export to Aruba ClearPass - PANW IoT 3rd Party IntegrationNo
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves all devices from IoT Security and sends them to the third-party integration instance. Filters for IoT Security devices: Custom attributes, site names, and tag enforcement. Set up IoT Security and XSOAR for ClearPass Integration
    PANW IoT 3rd Party Integration - Cisco ISEIncremental Export to Cisco ISE - PANW IoT 3rd Party IntegrationYes
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Playbook Poll Interval", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves devices from IoT Security and sends them to a third-party integration instance. Filters for IoT Security devices: Custom attributes, poll interval, site names, and tag enforcement. Set up IoT Security and XSOAR for Cisco ISE Integration
    PANW IoT 3rd Party Integration - Cisco ISEBulk Export to Cisco ISE - PANW IoT 3rd Party IntegrationNo
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves all devices from IoT Security and sends them to a third-party integration instance. Filters for IoT Security devices: Custom attributes, site names, and tag enforcement. Set up IoT Security and XSOAR for Cisco ISE Integration
    PANW IoT 3rd Party Integration - Cisco ISE pxGridBulk Export to Cisco ISE pxGrid - PANW IoT 3rd Party IntegrationNo
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves all devices from IoT Security and sends them to a third-party integration instance. Filters for IoT Security devices: Custom attributes, site names, and tag enforcement. Set up Integration with Cisco ISE pxGrid
    PANW IoT 3rd Party Integration - Cisco ISE pxGridIncrement Export to Cisco ISE pxGrid - PANW IoT 3rd Party IntegrationYes
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Playbook Poll Interval", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves devices from IoT Security and sends them to a third-party integration instance. Filters for IoT Security devices: Custom attributes, poll interval, site names, and tag enforcement. Set up Integration with Cisco ISE pxGrid
    PANW IoT 3rd Party Integration - ForescoutIncremental Export to Forescout - PANW IoT 3rd Party IntegrationYes
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Playbook Poll Interval", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves devices from IoT Security and sends them to a third-party integration instance.Filters for IoT Security devices: Custom attributes, poll interval, site names, and tag enforcement. Set up IoT Security and XSOAR for Forescout Integration
    PANW IoT 3rd Party Integration - ForescoutBulk Export to Forescout - PANW IoT 3rd Party IntegrationNo
    Required: "Integration Instance Name"
    Optional: "PANW IoT Device Custom Attributes", "Site Names", and "PANW IoT In Scope Tag Enforcement"
    Retrieves all devices from IoT Security and sends it to the third party integration instance.Filters for PANW IoT devices: site name(s), custom attributes, tag enforcement. Set up IoT Security and XSOAR for Forescout Integration
    Vulnerability Scanning
    Integration NamePlaybookRecurring JobJob ParametersDescriptionDetails
    PANW IoT 3rd Party Integration - QualysIncremental Qualys Get Scans and Report Handling V2- PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Generates and retrieves all reports from scans generated in the last hour. Get Vulnerability Scan Reports from Qualys
    PANW IoT 3rd Party Integration - QualysBulk Qualys Get Scans and Report Handling V2- PANW IoT 3rd Party IntegrationNoRequired: "Integration Instance Name"Generates and retrieves all reports from scans generated in the last 30 days. Get Vulnerability Scan Reports from Qualys
    PANW IoT 3rd Party Integration - QualysGet Qualys Scanners and Profiles - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Run this job periodically to retrieve names of all scan engines, sites, and vulnerability scan templates that Qualys uses. Set the interval to run the job based on the frequency of change on the Qualys side of the integration.Although this job is prebuilt on a cohosted XSOAR instance and runs every 15 minutes by default, it must be manually created on a full-featured XSOAR server.
    PANW IoT 3rd Party Integration - QualysQualys Report Handling - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Generates reports for all scans initiated from IoT Security since the last time this job was run. A typical recurring interval is every 20 or 30 minutes.Although this job is prebuilt on a cohosted XSOAR instance, it must be manually created on a full-featured XSOAR server.
    PANW IoT 3rd Party Integration - Rapid7 NexposeIncremental Rapid7 Get Scans and Generate Reports V2- PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Automatically generates reports of all vulnerability scans that Rapid7 performed in the last hour. Get Vulnerability Scan Reports from Rapid7
    PANW IoT 3rd Party Integration - Rapid7 NexposeIncremental Rapid7 Get Scans and Report Handling V2- PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Retrieves all Rapid7 vulnerability scan reports generated in the last hour. Get Vulnerability Scan Reports from Rapid7
    PANW IoT 3rd Party Integration - Rapid7 NexposeBulk Rapid7 Get Scans and Generate Reports V2- PANW IoT 3rd Party IntegrationNoRequired: "Integration Instance Name"Run this job on demand to generate Rapid7 vulnerability scan reports in bulk for the last 30 days. Get Vulnerability Scan Reports from Rapid7
    PANW IoT 3rd Party Integration - Rapid7 NexposeBulk Rapid7 Get Scans and Report Handling V2- PANW IoT 3rd Party IntegrationNoRequired: "Integration Instance Name"Run this job after finishing the bulk report generation job to import the reports from Rapid7 to IoT Security. Get Vulnerability Scan Reports from Rapid7
    PANW IoT 3rd Party Integration - Rapid7 NexposeGet Nexpose Engines, Sites and Templates - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Run this job periodically to retrieve names of all scan engines, sites, and vulnerability scan templates that Rapid7 uses. Set the interval to run the job based on the frequency of change on the Rapid7 side of the integration.Although this job is prebuilt on a cohosted XSOAR instance and runs every 15 minutes by default, it must be manually created on a full-featured XSOAR server.
    PANW IoT 3rd Party Integration - Tenable.ioIncremental Tenable Get Scans and Report Handling V2- PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Generates and retrieves all reports from scans generated in the last hour. Get Vulnerability Scan Reports from Tenable
    PANW IoT 3rd Party Integration - Tenable.ioBulk Export Devices to ServiceNow - PANW IoT 3rd Party IntegrationNoRequired: "Integration Instance Name"Generates and retrieves all reports from scans generated in the last 30 days. Get Vulnerability Scan Reports from Tenable
    PANW IoT 3rd Party Integration - Tenable.ioPANW IoT Get Tenable Scanners and Profiles - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Run this job periodically to retrieve names of all scan engines, sites, and vulnerability scan templates that Tenable uses. Set the interval to run the job based on the frequency of change on the Tenable side of the integration.Although this job is prebuilt on a cohosted XSOAR instance and runs every 15 minutes by default, it must be manually created on a full-featured XSOAR server.
    PANW IoT 3rd Party Integration - Tenable.ioTenable Report Handling - PANW IoT 3rd Party IntegrationYesRequired: "Integration Instance Name"Generates reports for all scans initiated from IoT Security since the last time this job was run. A typical recurring interval is every 20 or 30 minutes.Although this job is prebuilt on a cohosted XSOAR instance, it must be manually created on a full-featured XSOAR server.