IoT Security
Get Started with IoT Security Integrations
Table of Contents
Expand All
|
Collapse All
IoT Security Docs
-
-
- Firewall Deployment Options for IoT Security
- Use a Tap Interface for DHCP Visibility
- Use a Virtual Wire Interface for DHCP Visibility
- Use SNMP Network Discovery to Learn about Devices from Switches
- Use Network Discovery Polling to Discover Devices
- Use ERSPAN to Send Mirrored Traffic through GRE Tunnels
- Use DHCP Server Logs to Increase Device Visibility
- Control Allowed Traffic for Onboarding Devices
- Support Isolated Network Segments
-
Get Started with IoT Security Integrations
These are the sections in the Get Started with IoT Security Integrations chapter.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
One of the following Cortex XSOAR setups:
|
In addition to coordinating with Palo Alto Networks next-generation firewalls, IoT Security
integrates with third-party systems, augmenting their inventory, network management,
network security, and vulnerability detection by making them IoT aware and by gathering
device and network data from other sources to enrich its own inventory and capabilities.
IoT Security can integrate with the following third-party applications:
- Asset Discovery
- Asset Management
- AIMS
- Jamf Pro
- Microsoft SCCM
- Nuvolo
- RENOVOLive
- ServiceNow
- SoftPro Medusa
- Endpoint Protection
- Network Management
- Identity and Access Management
- Microsoft Entra ID
- IP Address Management
- Wireless Network Controllers
- Security Information and Event Management
- Network Access Control
- Aruba ClearPass
- Cisco ISE
- Cisco ISE pxGrid
- Extreme Networks ExtremeCloud IQ
- Forescout
- Vulnerability Scanning
IoT Security integrates with these third-party applications by leveraging
Cortex XSOAR
technology to integrate with third-party systems. It uses either a cohosted, partially
featured Cortex XSOAR instance (available at no extra charge when you purchase an
IoT Security Third-party Integrations Add-on license) or a full-featured
Cortex XSOAR server deployed either on premises or in the cloud. There’s also a
third option for integrating Cortex XSOAR with IoT Security through its API.
In short, there are three options:
- IoT Security with a cohosted, limited-featured Cortex XSOAR instance – This requires the purchase of an IoT Security Third-party Integrations Add-on license, which comes with an automatically generated, cloud-hosted Cortex XSOAR module at no extra charge.
- IoT Security with a full-featured Cortex XSOAR server – No add-on license required.The IoT Security FedRAMP Moderate solution must use a full-featured Cortex XSOAR server deployed on premises.
- Cortex XSOAR with access to the IoT Security API
Learn about using Cortex XSOAR to enable third-party integrations that
IoT Security supports.