Prisma Access
Onboard a ZTNA Connector Using Hyper-V
Table of Contents
Expand All
|
Collapse All
Prisma Access Docs
-
- Prisma Access China
- 4.0 & Later
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
-
-
-
- 5.0 Preferred and Innovation
- 4.2 Preferred
- 4.1 Preferred
- 4.0 Preferred
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
Onboard a ZTNA Connector Using Hyper-V
Onboard a ZTNA Connector using Microsoft Hyper-V.
To onboard a ZTNA Connector using a Microsoft Hyper-V virtual machine (VM), complete
the following steps.
Before you start, make sure that you have the following prerequisites:
- Download the ZTNA Connector Hyper-V image from the Customer Support Portal (CSP) under.UpdatesSoftware UpdatesPrisma AccessZTNA Connector for Hyper-V
- Make sure that you have a Hyper-V VM that meets the minimum hosting environments for ZTNA Connector.
- Create a Connector Group and a Connector for the Hyper-V VM.
- Select, and find the connector you created for the Hyper-V VM,SettingsZTNA ConnectorConnectorsCopy Tokenin theStatusarea, and copy theKeyandSecretvalues.If you're using Strata Cloud Manager, go to.WorkflowsZTNA ConnectorConnectors
- Upload thevhdimage you downloaded from the CSP to the Hyper-V VM.Make sure that the location you choose is reachable from the Hyper-V VM.One (vhd) file is required for each Hyper-V VM.
- Go to Hyper-V Manager and create a new virtual machine by selecting.ActionsNewVirtual MachineThis workflow shows the steps you perform to deploy Hyper-V VMs in a Microsoft server. The Hyper-V UI might look different in your environment.
- Go to theNextscreen and enter a unique name for the VM and go to theNextpage.
- (Optional) To change the location of the VM, selectStore the virtual machine in a different locationand select the location.
- SelectGeneration 1as the VM generation and go to theNextpage.This is the generation that the ZTNA Connector vhd file supports.
- Assign memory to the VM.Allocate a minimum memory of8192MB (8 GB), which meets the minimum requirements for a Hyper-V VM and go to theNextpage.
- Configure networking for your VM; then, go to theNextpage.The networking you use depends on your configuration. This example uses aNAT Switchfor the networking.
- Connect the virtual hard disk.
- SelectUse an existing virtual hard diskandBrowsefor the vhd file you downloaded
- Select the vhd file you downloaded theOpenit; then, go to theNextpage.
- Finishthe new VM wizard.Hyper-V creates the VM.
- Make sure that your VM has at least four processors by going to theProcessorarea and making sure that you select at least4virtual processors.
- Startthe VM.
- Connectto the serial console.
- Wait for the interactive CLI install program initializes, then Configure the ION model, key, and secret.
- Select1(an ION Model ofion 200v) from the choices that display.Select an ION model: 1) ion 200v 2) ion 3102v 3) ion 3104v 4) ion 3108v 5) ion 7108v 6) ion 7116v 7) ion 7132v 8) ion 9100v Choose a Number or (Q)uit:1CPU: Passed (needed 4) Memory: Passed (needed 8.0G) Disk: Could not verify (needs 40.0G) Network: Passed (needed 1) Select an item to modify, or submit config: 1) Model : ion 200v 2) ION Key : 3) Secret Key : 4) Controller 1 : Controller - DHCP 5) Port 1 : Disabled/Unused 6) Port 2 : Disabled/Unused 7) Port 3 : Disabled/Unused 8) Port 4 : Disabled/Unused 9) Port 5 : Disabled/Unused 10) Port 6 : Disabled/Unused 11) Port 7 : Disabled/Unused 12) Port 8 : Disabled/Unused 13) Port 9 : Disabled/Unused 14) Submit and restartInput the Key from the connector by selecting option2and entering the key you saved from the ZTNA Connector UI.Choose a Number or (Q)uit:2Enter ION Key[None]: xxxxxxxxxx-yyyyyyyy-zzz-1234-1234-abcdefghijkl Select an item to modify, or submit config: 1) Model : ion 200v 2) ION Key : xxxxxxxxx-yyyyyyyy-zzz-1234-1234-abcdefghijkl 3) Secret Key : 4) Controller 1 : Controller - DHCP 5) Port 1 : Disabled/Unused 6) Port 2 : Disabled/Unused 7) Port 3 : Disabled/Unused 8) Port 4 : Disabled/Unused 9) Port 5 : Disabled/Unused 10) Port 6 : Disabled/Unused 11) Port 7 : Disabled/Unused 12) Port 8 : Disabled/Unused 13) Port 9 : Disabled/Unused 14) Submit and restartEnter the ZTNA Connector secret by selecting option3and entering the secret you saved from the ZTNA Connector UI.Choose a Number or (Q)uit:3Enter ION secret[None]: abcde12345 Select an item to modify, or submit config: 1) Model : ion 200v 2) ION Key : xxxxxxxxx-yyyyyyyy-zzz-1234-1234-abcdefghijkl 3) Secret Key : abcde12345 4) Controller 1 : Controller - DHCP 5) Port 1 : Disabled/Unused 6) Port 2 : Disabled/Unused 7) Port 3 : Disabled/Unused 8) Port 4 : Disabled/Unused 9) Port 5 : Disabled/Unused 10) Port 6 : Disabled/Unused 11) Port 7 : Disabled/Unused 12) Port 8 : Disabled/Unused 13) Port 9 : Disabled/Unused 14) Submit and restartConfigure WAN port options.
- Select option5(Port 1).Choose a Number or (Q)uit:5Port 1: 1) Role : Disable 2) Cancel Port changes 3) Apply and returnSelect option1(Public/WAN).Choose a Number or (Q)uit:1Select Port Role: 1) Internet facing port (PublicWAN) 2) Private WAN port (PrivateWAN) 3) Bypass Port Pair 1 (WAN Port) 4) Bypass Port Pair 1 (LAN Port) 5) Bypass Port Pair 2 (WAN Port) 6) Bypass Port Pair 2 (LAN Port) 7) Bypass Port Pair 3 (WAN Port) 8) Bypass Port Pair 3 (LAN Port) 9) Bypass Port Pair 4 (WAN Port) 10) Bypass Port Pair 4 (LAN Port) 11) Disabled/Unused(Optional) If you need to set a static IP address, choose option2and set the IP address, gateway, and DNS server parameters; otherwise, select1.Choose a Number or (Q)uit:1Port 1: 1) Role : PublicWAN 2) Config via : DHCP 3) Cancel Port changes 4) Apply and returnSelect option4to return to the main menu.Choose a Number or (Q)uit:4Select an item to modify, or submit config: 1) Model : ion 200v 2) ION Key : xxxxxxxxx-yyyyyyyy-zzz-1234-1234-abcdefghijkl 3) Secret Key : abcde12345 4) Controller 1 : Controller - DHCP 5) Port 1 : PublicWAN - DHCP 6) Port 2 : Disabled/Unused 7) Port 3 : Disabled/Unused 8) Port 4 : Disabled/Unused 9) Port 5 : Disabled/Unused 10) Port 6 : Disabled/Unused 11) Port 7 : Disabled/Unused 12) Port 8 : Disabled/Unused 13) Port 9 : Disabled/Unused 14) Submit and restart Select an item to modify, or submit config: 1) Model : ion 200v 2) ION Key : xxxxxxxxx-yyyyyyyy-zzz-1234-1234-abcdefghijkl 3) Secret Key : abcde12345 4) Controller 1 : Controller - DHCP 5) Port 1 : PublicWAN - DHCP 6) Port 2 : Disabled/Unused 7) Port 3 : Disabled/Unused 8) Port 4 : Disabled/Unused 9) Port 5 : Disabled/Unused 10) Port 6 : Disabled/Unused 11) Port 7 : Disabled/Unused 12) Port 8 : Disabled/Unused 13) Port 9 : Disabled/Unused 14) Submit and restartConfigure LAN port options.
- Select option6(Port 2).Choose a Number or (Q)uit:6Port 2: 1) Role : Disable 2) Cancel Port changes 3) Apply and returnSelect option2(PrivateWAN).Choose a Number or (Q)uit:2Select Port Role: 1) Internet facing port (PublicWAN) 2) Private WAN port (PrivateWAN) 3) Bypass Port Pair 1 (WAN Port) 4) Bypass Port Pair 1 (LAN Port) 5) Bypass Port Pair 2 (WAN Port) 6) Bypass Port Pair 2 (LAN Port) 7) Bypass Port Pair 3 (WAN Port) 8) Bypass Port Pair 3 (LAN Port) 9) Bypass Port Pair 4 (WAN Port) 10) Bypass Port Pair 4 (LAN Port) 11) Disabled/Unused(Optional) If you need to set a static IP address, choose option2and set the IP address, gateway, and DNS server parameters; otherwise, select1.Choose a Number or (Q)uit: 2 Port 2: 1) Role : PrivateWAN 2) Config via : DHCP 3) Cancel Port changes 4) Apply and returnSelect option4to return to the main menu.Choose a Number or (Q)uit: 4 Select an item to modify, or submit config: 1) Model : ion 200v 2) ION Key : xxxxxxxxx-yyyyyyyy-zzz-1234-1234-abcdefghijkl 3) Secret Key : abcde12345 4) Controller 1 : Controller - DHCP 5) Port 1 : PublicWAN - DHCP 6) Port 2 : PrivateWAN - DHCP 7) Port 3 : Disabled/Unused 8) Port 4 : Disabled/Unused 9) Port 5 : Disabled/Unused 10) Port 6 : Disabled/Unused 11) Port 7 : Disabled/Unused 12) Port 8 : Disabled/Unused 13) Port 9 : Disabled/Unused 14) Submit and restartSave and reboot the connector.Choose a Number or (Q)uit: 14 WARNING! After this configuration is submitted, all hardware will be signed, logged, and permanently tied to the ION Key/Secret Key in the Prisma SDWAN Cloud Controller. WHAT THIS MEANS is that hardware cannot be added/removed (disks, network cards) after this 'SUBMIT' function. If any hardware changes are required beyond this 'SUBMIT', the ION will need to be re-deployed with a new ION Key and Secret Key. If there is a need to add or remove hardware, please answer 'N' below and shut down the ION and make the changes now. Submit these changes now?[N]: y Building configuration... [VFF:CFG] ZeroTouch Config Starting - config file parser [VFF:CFG] Attempting to load/parse as Config/INI file. [VFF:CFG] Successfully Loaded config style file. [VFF:CFG] Controller 1 successfully set to CONTROLLER/DHCP. [VFF:CFG] Port 1 successfully set to PUBLICWAN/DHCP. [VFF:CFG] Port 2 successfully set to PRIVATEWAN/DHCP. [VFF:CFG] WARN: Port 3 had no config section. Defaulting to Disable. [VFF:CFG] WARN: Port 4 had no config section. Defaulting to Disable. [VFF:CFG] WARN: Port 5 had no config section. Defaulting to Disable. [VFF:CFG] WARN: Port 6 had no config section. Defaulting to Disable. [VFF:CFG] WARN: Port 7 had no config section. Defaulting to Disable. [VFF:CFG] WARN: Port 8 had no config section. Defaulting to Disable. [VFF:CFG] WARN: Port 9 had no config section. Defaulting to Disable. [VFF:CFG] Success with Config/INI file parser. [VFF:KVM] Menu config end, continuing normal boot... Reboot-reason: manufacture
Recommended For You