VM-Flex Firewalls
Focus
Focus
Strata Logging Service

VM-Flex Firewalls

Table of Contents


VM-Flex Firewalls

Onboard VM-Flex firewalls to Strata Logging Service by selecting it on the deployment profile and activating the profile on your TSG.
VM-Flex firewalls are VM-Series firewalls licensed with Software NGFW Credits. You don't onboard them on the Device Associations page, and they aren't listed under Add Device. Instead, Strata Logging Service adds them automatically through their VM-Series deployment profile, so the profile settings you choose determine whether the firewalls send logs to your instance.
  1. Select Strata Logging Service or Strata Cloud Manager Pro on the deployment profile.
    In the Customer Support Portal, select ProductsSoftware NGFW Credits, and then select the option on the profile.
    Strata Cloud Manager Pro includes Strata Logging Service. A Strata Cloud Manager Pro or Strata Logging Service license that you bought for hardware firewalls doesn't onboard VM-Flex firewalls. You must select the option on the deployment profile.
  2. Activate the deployment profile on the TSG that contains your Strata Logging Service instance.
    1. Click Finish Setup next to the profile in the Customer Support Portal, or in the hub select Common ServicesSubscriptions & Add-onsReady for Activation.
    2. Select the TSG where your Strata Logging Service instance is, and activate the profile.
    • Activation takes about 15–50 minutes. It's complete when Profile Association Status shows Complete and the Finish Setup link is gone.
    • You can associate a deployment profile with only one TSG.
    • All deployment profiles on one TSG must use the same option: either all Strata Cloud Manager Pro or all Strata Logging Service.
  3. Deploy the firewalls with the auth code of the profile.
    For details, see Register the VM-Series Firewall (Software NGFW Credits). Strata Logging Service adds the firewalls that you deploy later with the same profile automatically. You don't need to add them.
  4. In the hub, select Common ServicesDevice Associations and check that each firewall is listed with Strata Logging Service.
    For details, see Device Associations.
  5. Connect the firewalls to Strata Logging Service and start sending logs.
    The firewall-side steps are the same as for other firewalls. The deployment profile only adds the firewall to your Strata Logging Service instance. See Onboard Firewalls to Strata Logging Service.
    1. Allow the required ports and FQDNs.
    2. Install a device certificate.
    3. Enable Cloud Logging, select the region of your Strata Logging Service instance, and start sending logs.
      See Start Sending Logs to Strata Logging Service. Firewalls managed by Strata Cloud Manager get Cloud Logging and default log forwarding automatically. See Use Strata Cloud Manager to Manage VM-Series.
    4. On the firewall, select DeviceSetupManagementCloud Logging and click Show Status.
      License, Certificate, and Customer Info must be green. You can also run request logging-service-forwarding status.

Troubleshooting

Customer is not provisioned in CSP

If a VM-Flex firewall shows Customer is not provisioned in CSP, the firewall isn't added to a Strata Logging Service instance yet. Check these items in order.
  1. Check that the deployment profile of the firewall has Strata Logging Service or Strata Cloud Manager Pro selected.
  2. Check that the profile is activated on the TSG where your Strata Logging Service instance is, and that Finish Setup is no longer shown.
  3. Check that the firewall is listed in Common ServicesDevice Associations with Strata Logging Service.
  4. On the firewall, run request logging-service-forwarding customerinfo fetch, and then run request logging-service-forwarding status again.
If the error stays after these checks, contact support. Provide the deployment profile auth code (it starts with D), the firewall serial number, and the TSG ID.

Move VM-Flex Firewalls to Another TSG

VM-Flex firewalls move with their deployment profile. To move them, you remove the association of the profile from the current TSG and then activate the profile on the new TSG.
  1. In the hub, select Common ServicesTenant ManagementDeployment ProfilesRemove Association for the profile on the current TSG.
    Removing the association removes all VM-Series firewalls of that profile from the current TSG. Logs that the firewalls already sent stay in the old Strata Logging Service instance for the retention days set on that instance, and Strata Logging Service deletes them when the retention period ends. The logs don't move to the new instance. New logs go to the new instance. See Allocate Log Retention Days.
  2. Activate the deployment profile on the new TSG, as described in VM-Flex Firewalls.
To move credits or a profile between credit pools, see Transfer Credits and the Transfer a Deployment Profile section of Manage a Deployment Profile.

Remove a Decommissioned VM-Flex Firewall

To remove a decommissioned VM-Flex firewall, deactivate its license. See Deactivate License (Software NGFW Credits). If the VM no longer exists, see Delicense Ungracefully Terminated Firewalls.

Onboard VM-Flex Panorama

For Panorama licensed with Software NGFW Credits, see Provision Panorama and Use Strata Cloud Manager for Panorama Managed VM-Series.