PA-400 Series Back Panel
Table of Contents
PA-400 Series Back Panel
Learn about the PA-400 Series firewall back-panel components.
View the back panel components of your PA-400 Series firewall.
The following image shows the back panel of the PA-410 and the table
describes each back panel component.
Item | Component | Description |
|---|---|---|
1 | Power adapter input | Use the power input to connect power to the firewall. The PA-410
ships with one 25W power adapter. Use only the PA-400 Series external power adapters provided by
Palo Alto Networks. |
2 | Ground stud | Use the single post ground stud to connect the firewall to earth
ground (ground cable not included). |
3 | Power Cord Retainer | Use the power cord retainer to secure the power cord. |
The following image shows the back
panel of the PA-415-5G and the table describes each back panel component.
Item | Component | Description |
|---|---|---|
1 | Antenna Connector | Four antenna connectors:
Two antenna connectors are on the back panel
of the device and two antenna connectors are on the PA-400 Series Front Panel. |
2 | SIM slots | Two SIM slots for cellular network connectivity. |
3 | Ground stud | Use the single post ground stud to connect the firewall to earth
ground (ground cable not included). |
The back panels of the PA-415 and PA-445 firewalls are visually
different but feature the same components. The following image shows the back panel of
the PA-415 and the table describes each back panel component.
Item | Component | Description |
|---|---|---|
1 | Ground stud | Use the single post ground stud to connect the firewall to earth
ground (ground cable not included). |
The following image shows the back panel of the
PA-455. There are no serviceable components on the back panel.
The back panels of the PA-440, PA-450, and PA-460 firewalls are
identical. The following image shows the back panel of the PA-440 and the table
describes each back panel component.
Item | Component | Description |
|---|---|---|
1 | Ground stud | Use the single post ground stud to connect
the firewall to earth ground (ground cable not included). |
2 | Power adapter inputs (PWR 1 and PWR 2) | Use the power inputs to connect power to
the firewall. The PA-440, PA-450, and PA-460 ship with one 50W power
adapter. A second adapter can be used for redundancy. Use
only the PA-400 Series external power adapters provided by Palo
Alto Networks. |
To view system firmware versions for any of the PA-400
Series firewalls, use the following CLI command:
admin@PA-400>show system firmware