: Network > Routing > Routing Profiles > Multicast
Focus
Focus

Network > Routing > Routing Profiles > Multicast

Table of Contents

Network > Routing > Routing Profiles > Multicast

Create multicast routing profiles to efficiently configure IPv4 multicast for a logical router.
Add multicast routing profiles to efficiently configure IPv4 multicast for a logical router.
Multicast Routing Profiles
Description
Multicast IPv4 PIM Interface Timer Profile
Name
Enter a name for the profile (maximum of 31 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.
Assert Interval
Enter the number of seconds between PIM Assert messages that the logical router sends to other PIM routers on the multiaccess network when they are electing a PIM forwarder. Range is 0 to 65,534; default is 177.
Hello Interval
Enter the number of seconds between PIM Hello messages that the logical router sends to its PIM neighbors from each interface in the interface group. Range is 1 to 180; default is 30.
Join Prune Interval
Enter the number of seconds between PIM Join messages (and between PIM Prune messages) that the logical router sends upstream toward a multicast source. Range is 60 to 600; default is 60.
Multicast IPv4 IGMP Interface Query Profile
Name
Enter a name for the profile (maximum of 31 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.
Max Query Response Time
Enter the maximum number of seconds allowed for a receiver to respond to an IGMP membership Query message before the logical router determines that the receiver no longer wants to receive multicast packets for the group. Range is 1 to 25; default is 10.
Query Interval
Enter the number of seconds between IGMP membership Query messages that the logical router sends to a receiver to determine whether the receiver still wants to receive the multicast packets for a group. Range is 1 to 1,800; default is 125.
Last Member Query Interval
Enter the number of seconds allowed for a receiver to respond to a Group-Specific Query that the logical router sends after a receiver sends a Leave Group message. Range is 1 to 25; default is 1.
leave group immediately when a leave message is received
If you enable this, when there is only one member in a multicast group and the logical router receives an IGMP Leave message for that group, this setting causes the logical router to remove that group and outgoing interface from the multicast routing information base (mRIB) and multicast forwarding information base (mFIB) immediately, rather than waiting for the Last Member Query Interval to expire. Enabling this setting saves network resources. Default is disabled.

Recommended For You