An SCTP client initiates an association; either endpoint
can end the association. Session timeouts control when the firewall
ends an association.
Two SCTP endpoints (servers) have an SCTP association
between them (rather than a TCP connection) and the SCTP service
reliably transfers user messages between the peers. An association
has an association ID and includes multiple streams (unidirectional
An upper-layer SCTP protocol (such as Diameter, for example)
initiates an SCTP association, which starts a four-way handshake.
The client (initiator) sends an SCTP packet with an INIT chunk which
provides the server with a list of the IP addresses through which
the client can be reached, a verification tag that must appear in
every packet the client sends in this association (validating the
sender), the number of outbound streams the client is requesting,
the number of inbound streams it can support, and an initial transmission
The server replies with an INIT-ACK chunk containing its own
list of IP addresses, initial sequence number, verification tag
(that must appear in every packet it sends for this association),
the number of outbound streams the server is requesting, the number
of inbound streams it can support, and a state cookie that ensures
the association is valid. The client then replies with a COOKIE-ECHO
chunk and the server validates the cookie and replies with a COOKIE-ACK
chunk. The COOKIE-ECHO and COOKIE-ACK messages can include user
data (chunks) for more efficiency.
When you Configure
, you can set an SCTP INIT timeout to control
the maximum length of time after receiving an INIT chunk before
the firewall receives the INIT-ACK chunk. If that time is exceeded,
then the firewall stops the association initiation. You can also
configure an SCTP COOKIE timeout to control the maximum length of
time after receiving an INIT-ACK chunk with the STATE COOKIE before
the firewall receives the COOKIE-ECHO chunk; if that time is exceeded,
that also causes the firewall to stop the association initiation.
You can also leverage the following SCTP timeouts as needed:
—Maximum length of time that can elapse without
SCTP traffic on an association before the firewall closes the association.
Discard SCTP timeout
—Maximum length of time that an SCTP
association remains open after the firewall denies the session based
on Security policy rules.
SCTP Shutdown timeout
—Maximum length of time that the
firewall waits after a SHUTDOWN chunk to receive a SHUTDOWN-ACK
chunk before the firewall disregards the SHUTDOWN chunk.
An established SCTP association ends in one of three ways: when
an endpoint sends a SHUTDOWN chunk to gracefully end the association
with its peer and receives a SHUTDOWN-ACK; when an endpoint sends
an ABORT chunk with or without cause parameters to close the association;
or when an SCTP timeout occurs. When any of these events occur,
the firewall brings down all SCTP sessions for that association.