Expand all | Collapse all
Power on the ION 3200
Connect the power cables to the ION device and plug
the device power cable into an AC power outlet. When you switch
on the power, the device powers on and the power indicator turns
green.
Restart the ION 3200
Press the power switch three times (press and hold for
one second, and then release) to restart the device.
Shut Down the ION 3200
Shut down the ION 3200 in the following
ways:
Shut down using the Device Toolkit commands
Run
the device toolkit command
debug shutdown
to shut
down the device.
Ensure the device is physically accessible
to turn it back on, before executing the command.
Shut down using the Power Switch
Press the power
switch for more than five to eight seconds and then release to shut
down the ION 3200 device.
When you shut down the device using the device CLI toolkit command
or the power switch, click the power switch once to power on the
device.
