Learn how to install a PA-220 firewall in an equipment
rack using one of the optional 19-inch rack-mount kits.
The PA-220 firewall one-unit (1U) rack tray
kit (PAN-PA-220-RACKTRAY) enables you to install one or two PA-220
firewalls in a two-post 19" rack. The installation hardware (screws
and brackets) for the left side of the tray is contained in bags.
The installation hardware for the right side of the tray is pre-installed.
This enables you to store the right side hardware in the tray (for
future use) if you are installing only one firewall. If you want to
install the firewall(s) in a four-post rack, purchase and install
the four-post rack kit (PAN-PA-1RU-RACK4) in addition to the one-unit
rack tray kit (PAN-PA-220-RACKTRAY) to secure the firewall to both
the front and back rack-posts.
The PA-220 firewall one-unit
(1U) rack kit (PAN-PA-220-RACK-SINGLE) enables you to install a
single PA-220 firewall in a two-post or four-post 19” rack. The
installation hardware includes two side brackets for attaching up
to two PSUs to either side of the firewall.
To
ease installation, first install the firewall(s) in the rack tray
and then install the assembled rack tray into the equipment rack.
