Install the PA-800 Series Firewall in a Four-Post 19-inch Equipment Rack
Table of Contents
Install the PA-800 Series Firewall in a Four-Post 19-inch
Equipment Rack
The following procedure describes how to install
the PA-800 Series firewall in a four-post equipment rack. Before
you begin, make sure you purchased the back brackets (PAN-PA-1RU-RACK4)
to secure the firewall to the back rack-posts.
- Attach one rack-mount bracket to each side of the firewall in the front-mount position using four #6-32 x 5/16” screws for each bracket and torque to 9 in-lbs.
- Attach one rack-mount rail to each side of the firewall using two #6-32 x 5/16” screws for each rail and torque to 9 in-lbs.
- With help from another person, hold the firewall in the rack and secure the front rack-mount brackets to the front rack-posts using two screws for each bracket. Use the appropriate screws (#10-32 x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs. Use cage nuts to secure the screws if the rack has square holes.
- Slide one back rack-mount bracket into each of the two previously installed side rack-mount rails and secure the brackets to the back rack-posts using the appropriate screws for your rack (#10-32 x 3/4” or #12-24 x 1/2”) and torque to 25 in-lbs.
