Install the PA-800 Series Firewall in a Two-Post 19-inch Equipment Rack
Table of Contents
Install the PA-800 Series Firewall in a Two-Post 19-inch
Equipment Rack
The following procedure describes how to install
the PA-800 Series firewall in a two-post equipment rack.
When installing the firewall in a two-post
equipment rack, ensure the rack is properly anchored and it can
support the weight of the installed equipment.
- Attach one rack-mount bracket to each side of the firewall using four #6-32 x 5/16” screws for each bracket and torque to 9 in-lbs. For a two-post rack, we recommend you can install the front brackets in the mid-mount position as shown.
- With help from another person, hold the firewall in place in the rack and secure the rack-mount brackets to the rack using two screws for each bracket. Use the appropriate screws (#10-32 x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs. Use cage nuts to secure the screws if the rack has square holes.
