Use Case: Configure Active/Active HA with Route-Based Redundancy
Table of Contents
Use Case: Configure Active/Active HA with Route-Based Redundancy
The following Layer 3 topology illustrates
two PA-7050 firewalls in an active/active HA environment that use Route-Based
Redundancy. The firewalls belong to an OSPF area. When a
link or firewall fails, OSPF handles the redundancy by redirecting
traffic to the functioning firewall.
- Configure
Active/Active HA.Perform Step 1 through Step 15.
- Configure OSPF.See OSPF.
- Define HA failover conditions.
- Commit the configuration.
- Configure the peer firewall in the same way, except if you selected Device ID 0 for the first firewall, select Device ID 1 for the peer firewall.