Focus

ION 3200 Hardware Reference

Install ION 3200H on a Wall

Table of Contents

Lets learn how to install ION Device 3200H and 3200H-C5G-WW on a wall.

Install an ION 3200H on a drywall or plywood wall using the wall-mount kit as described in the following procedure.

The wall mount kit (PAN-1RU-SMALL-WALLMNT) is not included with the device and must be purchased separately.

After installing, make sure to keep the device clean and clear of dust to ensure optimal heat dissipation and maintain proper hardware operation.

Mark the locations on the wall that line up with the wall mount holes on the bottom of the provided wall mount.

Ensure there are no building services (water, gas, or wiring) behind the wall where you intend to install the device.
Attach the device to the wall mount using three #6-32 screws and a #2 Phillips-head screwdriver.
Attach the wall mount to the wall using four screws that are appropriate for your wall (sheet metal and drywall inserts are included with the wall mount kit). Ensure that the side fins run vertically, as shown in the above figure.