Focus

ION 3200 Hardware Reference

Power on the ION 3200

Table of Contents

Power on the ION 3200

Power on the ION 3200.

Connect the power cables to the ION device and plug the device power cable into an AC power outlet. When you switch on the power, the device powers on and the power indicator turns green.

Restart the ION 3200 and ION 3200H

Press the power switch three times (press and hold for one second, and then release) to restart the device.

Shut Down the ION 3200 and ION 3200H

Shut down the ION 3200 and in the following ways:

Shut down using the Device Toolkit commands
Run the device toolkit command debug shutdown to shut down the device.

Ensure the device is physically accessible to turn it back on, before executing the command.
Shut down using the Power Switch
Press the power switch for more than five to eight seconds and then release to shut down the ION 3200 and device.

When you shut down the device using the device CLI toolkit command or the power switch, click the power switch once to power on the device.

Install the ION 3200 on a Flat Surface

Troubleshoot the ION 3200