Focus
Focus
Table of Contents

PA-220R Status LEDs

Learn how to interpret the status LEDs on a PA-220R firewall.
The following table describes how to interpret the status LEDs on the PA-220R firewall.
LED
Description
PWR (Power)
  • Green—The firewall is powered on.
  • Off—The firewall is not powered on or an error occurred with the internal power system (for example, power is not within tolerance levels).
ALRM (Alarm)
  • Red—A hardware failure, such as a power supply failure, a firewall failure that caused an HA failover, a drive failure, or if the hardware overheated and exceeded the high temperature threshold.
  • Off—The firewall is operating normally.
STAT (Status)
  • Green—The firewall is operating normally.
  • Yellow—The firewall is booting.
HA (High Availability)
  • Green—The firewall is the active peer in an active/passive configuration.
  • Yellow—The firewall is the passive peer in an active/passive configuration.
  • Off—HA is not operational on this firewall.
In an active/active configuration, the HA LED indicates HA status for only the local firewall and has two possible states; it does not indicate HA connectivity of the peer. Green indicates that the firewall is either active-primary or active-secondary and off indicates that the firewall is in any other state (for example, non-functional or suspended).
TEMP (Temperature)
  • Green—The firewall temperature is normal.
  • Yellow—The firewall temperature is outside tolerance levels.
Ethernet
port LEDs
  • Left LED—Solid green indicates a network link.
  • Right LED—Blinking green indicates network activity.
SFP LEDs
These ports have one green LED:
  • Solid green indicates a network link.
  • Blinking green indicates network activity.