ION 3200 Hardware Reference
    : ION Device 3200H LEDs
    Focus
    Download PDF
    Focus
    1. Home
    2. Firewalls & Appliances
    3. ION 3200 Hardware Reference
    4. ION 3200 and ION 3200H Overview
    5. ION Device 3200H LEDs
    Download PDF

    ION 3200 Hardware Reference

    ION Device 3200H LEDs

    Table of Contents

    ION Device 3200H LEDs

    View the status LEDs on the ION 3200H Device in order to monitor the network connection, temperature, and other device statuses.
    The following table describes how to interpret the status LEDs on all of the ION 3200H device.
    LEDDescription
    Front Panel LEDs
    (Power)
    • Green—The device is powered on.
    • Off—The device is not powered on or an error has occurred with the internal power system (for example, power is not within tolerance levels).
    (Operating System Status)
    • Green LED indicates OS is running.
    • Red LED indicates secure boot has failed.
    (Controller)
    • Green LED indicates that the device is connected to the controller.
    • Red LED indicates the device is attempting to connect to the controller.
    (High Availability)
    • Green—The device is the active peer in an active/passive configuration.
    • Yellow—The device is the passive peer in an active/passive configuration.
    • Off—High availability (HA) is not operational on this device.
    In an active/active configuration, the HA LED only indicates HA status for the local device and has two possible states (green or off); it does not indicate HA connectivity of the peer. Green indicates that the device is either active-primary or active-secondary and off indicates that the device is in any other state (for example, non-functional or suspended).
    Cellular LEDCellular ION Device
    Cellular
    The device cellular LED indicates the signal strength.
    • Off—No modem detected.
    • Solid green LED indicates maximum signal strength.
      Blinking green LED indicates good to poor Radio Signal Strength Indicator. The cellular LED blinking rate is based on the signal strength:
      • 25 blinks in 10 seconds—Good signal strength.
      • 10 blinks in 10 seconds—Fair signal strength.
      • 5 blinks in 10 seconds—Poor signal strength.
      You can also the view the signal strength on the Interface tab of the Prisma SD-WAN web interface.
      - Excellent
      - Good
      - Fair
      - Poor
      - Modem Error, hover over the icon to see the error.
      - No modem or signal detected.

    © 2025 Palo Alto Networks, Inc. All rights reserved.