Interpret the PA-5400 Series LEDs
Table of Contents
Expand all | Collapse all
Interpret the PA-5400 Series LEDs
Learn how to interpret the status LEDs on a PA-5400 Series
firewall.
The following table describes how to interpret the status LEDs on a PA-5410, PA-5420, PA-5430,
PA-5440, and PA-5445 firewall.
The PA-5450 LEDs are located on the interface cards. For
more information, see PA-5400 Series Firewall Module and Interface Card Information.
LED | Description |
---|---|
Front Panel LEDs | |
Service
| |
Power
| |
Status
| |
High Availability
In an active/active configuration, the
HA LED only indicates HA status for the local firewall and has two
possible states (green or off); it does not indicate HA connectivity
of the peer. Green indicates that the firewall is either active-primary
or active-secondary and off indicates that the firewall is in any
other state (For example, non-functional or suspended). | |
Temperature
See the PA-5400 Series Firewall Environmental Specifications for the
operating temperature range. | |
Alarm
| |
Fans
| |
Power Supplies 1 and 2 When
facing the back of the firewall, power supply 1 (PWR 1) is on the
left and power supply 2 (PWR 2) is on the right.
| |
Ethernet Port LEDs | |
RJ-45 | These ports have one green LED each.
|
SFP+, HA1-A and HA-1B, and Management port | These ports have two LEDs each. The color
of the LED differs based on the port speed. 1G—Yellow 10G—Green |
SFP28 and QSFP28 | The SFP28 ports have two LEDs each. The
QSFP28 ports have one or four corresponding LEDs each depending
on if the ports are broken out or not. The color of the LED differs
based on the port speed. 1G—Yellow 10G—Green 25G—Green
& Blue 40G—Yellow 100G—Blue
|
Back Panel LEDs | |
Power supply LEDs In AC power
supplies, the input LED indicates the status of the AC input power
and the output LED indicates the DC output that powers the firewall.
In DC power supplies, the input and output are both DC. | The AC and DC power supplies have a FAIL
and an OK LED. The LED behavior varies based on which power supply
model you have. Power Supply (with black handle)
Power
Supply (with red handle)
|
Fan Assembly LED |
|