Claim and Assign the Prisma SD-WAN ION
Table of Contents
Claim and Assign the Prisma SD-WAN ION
Learn how to claim and assign the vION.
After the ION device successfully boots up, as long as it can connect to the Prisma SD-WAN controller, it will show up as Unclaimed: Online under . It can take up to 10 minutes for the ION device to show up in the
Controller.
- Claim the device by selecting .It will transition to an offline state while going through the claiming process.
![]()
Create a Data Center Site while the device is being claimed.Although this workflow depicts how to assign the vION to a data center site, you can also assign the vION to a branch site or a branch gateway site. However, Prisma SD-WAN does not support high availability for vIONs deployed at a branch site or a branch gateway site.- Select .Enter a name for the site and other site details and click Next.Add an Internet Circuit in the Circuits section and click Next.
![]()
Assign the device to the data center by selecting Assign Devices and selecting the ION device from the list of Select Devices and Save.![]()
Configure the device.- Select .From Actions, select Configure the device.
![]()
Enter a device name on the Basic Info screen.Configure Port 1, by assigning the Internet WAN circuit label that you created in step 2 and providing the external NAT address and port.To determine the external IP address, locate ElasticIP in the Outputs section of the CloudFormation template.![]()
