Focus

PA-7500 Next-Gen Firewall Hardware Reference

Interpret the PA-7500 Series Firewall LEDs

Table of Contents

Read the LED definitions of the PA-7500 Series firewall power supplies and fan assemblies.

The following table describes the definitions of the LEDs located on the power supplies and fan assemblies. For the interface card LED definitions, see Interpret the PA-7500 Series Firewall Interface Card LEDs.

The AC and DC power supplies have a FAIL and an OK LED.

AC Power Supply
Solid Green	Power output is on.
Blinking Green (0.5Hz)	Standby mode. AC power is present but only at 12VSB (Volts Standby).
Solid Yellow	Power supply critical failure.
Off	No AC power or AC power cord is unplugged.

DC Power Supply
Solid Green	Power output is on.
Blinking Green (0.5Hz)	Standby mode. DC power is present but only at 12VSB (Volts Standby).
Solid Yellow	Power supply critical failure.
Off	No DC power.

Fan Assembly
Green	The fan trays and all fans are operating normally.
Red	A fan in the fan tray failed (see Replace a PA-7500 Series Firewall Fan Assembly)