Replace a PA-7500 Series Firewall DPC in a NGFW Cluster
Table of Contents
Expand all | Collapse all
Replace a PA-7500 Series Firewall DPC in a NGFW Cluster
Learn how to remove and replace a PA-7500 DPC in a NGFW clustering
configuration.
- Unlock the DPC and remove it from the chassis.Install the replacement DPC.Verify the slot and serial number of the new DPC using the following CLI command: show chassis inventory.Monitor the DPC boot process using the following command: show chassis status slot [0] where [0] is the number of the slot in which the new DPC is installed. When the DPC is fully online, the Card Status reads Up.