The licensing process for the VM-Series firewall
uses the UUID and the CPU ID to generate a unique serial number
for each VM-Series firewall. Hence, when you generate a license,
the license is mapped to a specific instance of the VM-Series firewall
and cannot be modified.
Use the instructions in this section,
if you are:
Migrating from an evaluation license to
a production license.
Upgrading the model to allow for increased capacity. For
example you want to upgrade from the VM-100 to the VM-300 model.
A capacity upgrade restarts some critical processes on the
firewall. An HA configuration is recommended to minimize service
disruption; to upgrade the capacity on a HA pair, see Upgrade
the VM-Series Model in an HA Pair.
In a private or public cloud deployment, if your firewall
is licensed with the BYOL option, you must deactivate your VM before
you change the instance type or VM type and apply the license again
on the firewall after you complete the model or instance upgrade.
When you change the instance type, because the firewall has a new
UUID and CPU ID, the existing license will no longer be valid.
Allocate additional hardware resources to your
Before initiating the capacity upgrade, you must verify
that enough hardware resources are available to the VM-Series firewall
to support the new capacity. The process for assigning additional
hardware resources differs on each hypervisor.
To check the
hardware requirements for your new VM-Series model, see VM-Series
Although the capacity upgrade does not require
a reboot of the VM-Series firewall, you need to power down the virtual
machine to change the hardware allocation.
Make sure that you are using the same account that
you used to register the initial license.
From the menu on the left, select
API Key Management
Copy the API key.
On the firewall, use the CLI to install the API key copied
in the previous step.
request license api-key set key
Enable the firewall to
Verify Update Server
your changes. Ensure that
you have a locally-configured user on the firewall. Panorama pushed
users might not be available after the deactivation if the configuration
exceeds the non-licensed PA-VM objects limit.
Upgrade the capacity.
Upgrade VM Capacity
activate your licenses and subscriptions in one of the following
option if your firewall does not have connectivity to the Customer Support portal.
In this case, you must download a license key file from the support
site on an Internet connected computer and then upload to the firewall.
Use an authorization code
—Use this option
to upgrade the VM-Series capacity using an authorization code for
licenses that have not been previously activated on the support
portal. When prompted, enter the
Verify that your firewall is licensed successfully.
verify that the license was successfully activated.