Launch the VM-Series Firewall on NSX-T (East-West)

Log in to the NSX-T Manager.
Select
System
Service Deployments
.
Select your service definition from the
Partner Service
drop-down.
Click
Deploy Service
.
Enter a descriptive
Name
for your service deployment.
Select the
Compute Manager
(vCenter).
Select the
Cluster
where the service will be deployed. You must select a cluster with
NSX Configuration
.
Select a
Host
if you are launching the VM-Series in a clustered deployment. Select a particular host from the
Host
drop-down or
Any
to allow NSX-T Manager to choose the host. This option is grayed out in
Per Host
deployments.
Select a
Data Store
as the repository for the VM-Series firewall. In a clustered deployment, select a shared data store if you choose
Any
for the host or select a local data store if you specified a particular host.
Configure the
Networks
settings.
In the Networks column, click
Edit Details
.
Select the
Network
for
eth0 - Management Nic
.
Select the
Network Type
—DHCP or Static IP Pool. If you choose Static IP Pool, select an
IP Pool
.
Check
eth1 - Data-1 Nic
.
Click
Save
.
Select or configure a
Service Segment
. To configure a service segment, complete the following procedure.
Click

Action

in the

Service Segments

column.



Click

Add Service Segment

.

Enter a descriptive

Name

.

Select a

Transport Zone (Overlay)

.

Click

Save

and

Close

.


Select a
Deployment Type
—
Clustered
or
Host Based
.
If you selected
Clustered
as the
Deployment Type
, enter the
Clustered Deployment Count
to specify the number of VM-Series firewall instances to deploy on the cluster.
Click
Save
.
Verify that your firewalls deployed successfully.
Select
System
Service Deployments
Service Instances
.
Confirm that your firewalls are listed and the
Deployment Status
shows
Up
.
Verify that your firewalls connected to Panorama.
Log in to Panorama.
Select
Panorama
Managed Devices
Summary
.
Confirm that your firewalls are listed under the correct device group and the
Device State
shows
Connected
.