Known Issues in Panorama Plugin for Cisco ACI 2.0.3
Table of Contents
Expand all | Collapse all
-
-
-
-
- Features Introduced in Zero Touch Provisioning 2.0
- Known Issues in the Zero Touch Provisioning 2.0.4 Release
- Known Issues in the Zero Touch Provisioning 2.0.3 Release
- Known Issues in the Zero Touch Provisioning 2.0.2 Release
- Known Issues in the Zero Touch Provisioning 2.0.1 Release
- Known Issues in the Zero Touch Provisioning 2.0.0 Release
- Limitations
-
-
Known Issues in Panorama Plugin for Cisco ACI 2.0.3
The following list describes known issues
in the Panorama plugin for Cisco ACI 2.0.3.
PLUG-4467
When adding match criteria to a dynamic
address group, if an extraneous space or character is added at the
end of the tag, the dynamic address group count on the Cisco ACI dashboard
does not match the dynamic address count displayed after clicking
the tile to view additional information.
Workaround: Remove any extraneous spaces or characters
from your dynamic address group configuration to resolve the count
mismatch.
PLUG-1387
The plugin does not immediately process new monitoring
definitions after you configure and commit them under PanoramaCisco ACIMonitoring Definitions. Instead,
the monitoring definition must complete the configured monitoring interval
before it begins processing the new monitoring definition. For example,
if the monitoring interval is set to 10 minutes, the monitoring
definition status will update after 10 minutes.
Workaround: Select PanoramaCisco ACIMonitoring Definition and
click Synchronize Dynamic Objects to force
Panorama to sync with the APIC before the monitoring interval expires.