Known Issues in Panorama Interconnect Plugin 1.0.2
Table of Contents
Expand all | Collapse all
-
-
-
-
- Features Introduced in Zero Touch Provisioning 2.0
- Known Issues in the Zero Touch Provisioning 2.0.4 Release
- Known Issues in the Zero Touch Provisioning 2.0.3 Release
- Known Issues in the Zero Touch Provisioning 2.0.2 Release
- Known Issues in the Zero Touch Provisioning 2.0.1 Release
- Known Issues in the Zero Touch Provisioning 2.0.0 Release
- Limitations
-
-
Known Issues in Panorama Interconnect Plugin 1.0.2
The following list describes known issues
in the Panorama Interconnect plugin 1.0.2.
PLUG-1137
You are unable to search for Devices by Name when using
the search field (PanoramaInterconnectDevices).
PLUG-1101
On the Panorama Controller, you cannot group Panorama
Nodes (PanoramaInterconnectPanorama NodesGroup HA Peers)
in a high availability (HA) configuration if they are configured
with an IPv6 IP address.
PLUG-602
Refreshing or navigating to a different tab in the Panorama
web interface deselects Panorama Nodes (PanoramaInterconnectPanorama Nodes)
and firewalls (PanoramaInterconnectDevices).
PLUG-557
When the Panorama Controller is in an HA configuration,
the passive HA peer does not get updated with the Panorama Node
PAN-OS and Interconnect plugin versions, and which results in a not in sync status.