: Create an Inbound Web Contract
Focus
Focus

Create an Inbound Web Contract

Table of Contents

Create an Inbound Web Contract

You must also create a contract and filters to allow inbound traffic to reach the servers behind the firewall. The following procedure describes the process of creating a contract and filters that allows HTTP and HTTPS web traffic to access resources behind the firewall.
  1. On the
    Tenants
    tab, double-click on the name of your tenant.
  2. Select
    Contracts
    Filters
  3. Right-click on
    Filters
    and select
    Create Filter
    .
  4. Enter a descriptive
    Name
    for the filter.
  5. Create a filter entry for HTTP traffic.
    1. Click the plus (+) button to the right of
      Entries
      .
    2. Enter a descriptive
      Name
      for the
      HTTP
      filter.
    3. Select
      IP
      from the
      EtherType
      drop-down.
    4. Select
      tcp
      from the
      IP Protocol
      drop-down.
    5. Select
      http
      from the
      Destination Port From
      drop-down.
    6. Click
      Update
      .
  6. Create a filter entry for HTTPS traffic.
    1. Click the plus (+) button to the right of
      Entries
      .
    2. Enter a descriptive
      Name
      for the
      TCP
      filter.
    3. Select
      IP
      from the
      EtherType
      drop-down.
    4. Select
      tcp
      from the
      IP Protocol
      drop-down.
    5. Select
      https
      from the
      Destination Port From
      drop-down.
    6. Click
      Update
      .
  7. Click
    Submit
    .
  8. Create a contract for inbound web traffic.
    1. On the
      Tenants
      tab, double-click on the name of your tenant and select
      Contracts
      .
    2. Right-click on
      Contracts
      and select
      Create Contract
      .
    3. Enter a descriptive
      Name
      for your
      Contract
      .
    4. Click the plus (+) button to the right of
      Subjects
      .
    5. Enter a descriptive
      Name
      for you
      Subject
      .
    6. Under Filter Chain, click the plus (+) button to the right of
      Filters
      .
    7. Select the filter you created previously from the drop-down.
    8. Click
      OK
      .
  9. Click
    Submit
    .

Recommended For You