Enable VM Monitoring to Track Changes on the Virtual Network
Focus
Focus

Enable VM Monitoring to Track Changes on the Virtual Network

Table of Contents

Enable VM Monitoring to Track Changes on the Virtual Network

VM information sources provides an automated way to gather information on the Virtual Machine (VM) inventory on each monitored source (host); the firewall can monitor the VMware ESXi, vCenter Server, AWS-VPC, Microsoft Azure VNet, and Google Cloud. As virtual machines (guests) are deployed or moved, the firewall collects a predefined set of attributes (or metadata elements) as tags; these tags can then be used to define Dynamic Address Groups (see Use Dynamic Address Groups in Policy) and matched against in policy.
You can directly configure the firewall or use Panorama templates to monitor up to 10 VM information sources.
VM Information Sources
offers easy configuration and enables you to monitor a predefined set of 16 metadata elements or attributes. See Attributes Monitored on Virtual Machines in Cloud Platforms for the list. By default, the traffic between the firewall and the monitored sources uses the management (MGT) port on the firewall.
  • When monitoring ESXi hosts that are part of the VM-Series NSX edition solution, use Dynamic Address Groups instead of using VM Information Sources to learn about changes in the virtual environment. For the VM-Series NSX edition solution, the NSX Manager provides Panorama with information on the NSX security group to which an IP address belongs. The information from the NSX Manager provides the full context for defining the match criteria in a Dynamic Address Group because it uses the service profile ID as a distinguishing attribute and allows you to properly enforce policy when you have overlapping IP addresses across different NSX security groups. Up to a maximum of 32 tags (from vCenter server and NSX Manager) that can be registered to an IP address.
  • For monitoring the virtual machines within your Azure deployment, instead of VM Monitoring Sources, you need to deploy the VM Monitoring script that runs on a virtual machine within the Azure public cloud. This script collects the IP address-to-tag mapping information for your Azure assets and publishes it to the firewalls and corresponding virtual systems you specify in the script.
  • For Panorama version 8.1.3 and later, you can also use the Panorama plugin for AWS or Azure to retrieve VM Information and register it to the managed firewalls. See Attributes Monitored on Virtual Machines in Cloud Platformsfor details.
  1. Enable VM Monitoring.
    You can configure up to 10 VM information sources for each firewall, or for each virtual system on a multiple virtual systems capable firewall.
    If your firewalls are configured in a high availability configuration:
    • In an active/passive setup, only the active firewall monitors the VM sources.
    • In an active/active setup, only the firewall with the priority value of primary monitors the VM sources.
    1. Select
      Device
      VM Information Sources
      . This example shows you how to add VMware ESX(i) or vCenter Server.
    2. Click
      Add
      and enter the following information:
      • A
        Name
        to identify the source that you want to monitor.
      • Select the
        Type
        to indicate whether the source is an
        AWS VPC
        , a
        Google Compute Engine
        instance, a
        VMware ESX(i)
        server, or a
        VMware vCenter
        Server.
        The type chosen determines the fields displayed.
      • Enter the
        Port
        on which the source is listening.
      • To change the default value, select the check box to
        Enable timeout when the source is disconnected
        and specify the value. When the specified limit is reached or if the host cannot be accessed or does not respond, the firewall will close the connection to the source.
      • Add the credentials (
        Username
        and
        Password
        ) to authenticate to the server specified above.
      • Define the
        Source
        —hostname or IP address.
      • (
        Optional
        ) Modify the
        Update interval
        to a value between 5-600 seconds. By default, the firewall polls every 5 seconds. The API calls are queued and retrieved within every 60 seconds, so updates may take up to 60 seconds plus the configured polling interval.
      • Click
        OK
        , and
        Commit
        the changes.
      • Verify that the connection
        Status
        displays as connected.
  2. Verify the connection status.
    Verify that the connection
    Status
    displays as connected.
    If the connection status is pending or disconnected, verify that the source is operational and that the firewall is able to access the source. If you use a port other than the MGT port for communicating with the monitored source, you must change the service route (
    Device
    Setup
    Services
    , click the
    Service Route Configuration
    link and modify the
    Source Interface
    for the
    VM Monitor
    service).

Recommended For You