Scheduled Configuration Export Settings
Enter a name to identify the configuration export job (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, hyphens, and underscores.
Enter an optional description.
Select to enable the export job.
Scheduled export start time (daily)
Specify the time of day to start the export (24 hour clock, format HH:MM).
Select the protocol to use to export logs from Panorama to a remote host. Secure Copy (
SCP) is a secure protocol;
Enter the IP address or hostname of the target SCP or FTP server.
Enter the port number on the target server.
Specify the path to the folder or directory on the target server that will store the exported configuration.
For example, if the configuration bundle is stored in a folder called exported_config within a top level folder called Panorama, the syntax for each server type is:
The following characters:
Z. Spaces are not supported in the file
Enable FTP Passive Mode
Select to use FTP passive mode.
Specify the username required to access the target system.
Password / Confirm Password
Specify the password required to access the target system.
Use a password with maximum length of 15 characters. If the password exceeds 15 characters, the test SCP connection will display an error because the firewall encrypts the password when it tries to connect to the SCP server and the length of the encrypted password can be up to 63 characters only.
Test SCP server connection
Select to test communication between Panorama and the SCP host/server.
To enable the secure transfer of data, you must verify and accept the host key of the SCP server. The connection is not established until the host key is accepted. If Panorama has an HA configuration, you must perform this verification on each HA peer so that each one accepts the host key of the SCP server.