: RIP Interfaces Tab
Focus
Focus

RIP Interfaces Tab

Table of Contents

RIP Interfaces Tab

  • Network > Virtual Routers > RIP > Interfaces
Use the following fields to configure RIP interfaces:
RIP – Interface Settings
Description
Interface
Select the interface that runs the RIP protocol.
Enable
Select to enable these settings.
Advertise
Select to enable advertisement of a default route to RIP peers with the specified metric value.
Metric
Specify a metric value for the router advertisement. This field is visible only if you enable
Advertise
.
Auth Profile
Select the profile.
Mode
Select
normal
,
passive
, or
send-only
.
BFD
To enable BFD for a RIP interface (and thereby override the BFD setting for RIP, as long as BFD is not disabled for RIP at the virtual router level), select one of the following:
  • default
    (profile with the default BFD settings)
  • a BFD profile that you created on the firewall
  • New BFD Profile
    to create a new BFD profile
Select
None (Disable BFD)
to disable BFD for the RIP interface.

Recommended For You