Known Issues in Panorama Plugin for VMware NSX 5.0.2
Table of Contents
Expand all | Collapse all
-
-
-
-
- Features Introduced in Zero Touch Provisioning 2.0
- Known Issues in the Zero Touch Provisioning 2.0.4 Release
- Known Issues in the Zero Touch Provisioning 2.0.3 Release
- Known Issues in the Zero Touch Provisioning 2.0.2 Release
- Known Issues in the Zero Touch Provisioning 2.0.1 Release
- Known Issues in the Zero Touch Provisioning 2.0.0 Release
- Limitations
-
-
Known Issues in Panorama Plugin for VMware NSX 5.0.2
The following list describes known issues in the Panorama plugin for VMware NSX
5.0.2.
PLUG-13198
VM-Series firewall on VMware NSX instances might still be listed in Managed Device
Summary on Panorama after the firewalls are delicensed.
PLUG-10874
Service chain mapping information sent
from the Panorama plugin for VMware NSX is not read correctly by
the VM-Series firewall.
Workaround: Upgrade the VM-Series plugin on your VM-Series
firewalls to version 2.1.8 and later (for PAN-OS 10.1.x or older)
or version 3.0.3 and later (for PAN-OS 10.2.x).
PLUG-7872
An NSX-T Service Definition does not
go out-of-sync, as it should, when a steering rule is moved up or
down in NSX-T. After performing a config sync, the steering rules
move back to their original positions.
PLUG-7030
In the Panorama CLI, there is a specific
order of expression arguments that must be followed when defining
NSX-T security-centric membership criteria. If you do not follow
this order, Panorama returns an error.
Workaround: Use this following order when defining membership
criteria through the Panorama CLI.
set plugins vmware_nsx nsx_t membership-criteria SDEF1 dynamic-address-groups DAG1 criteria C1 rule R1 member-type VirtualMachine key Tag operator CONTAINS value ubuntu scope os
Or without scope
set plugins vmware_nsx nsx_t membership-criteria SDEF1 dynamic-address-groups DAG1 criteria C1 rule R1 member-type VirtualMachine key Tag operator CONTAINS value ubuntu