Install the PA-400R Series Firewall on a DIN Rail
Table of Contents
Install the PA-400R Series Firewall on a DIN Rail
Install a PA-400R Series firewall in an equipment rack on a DIN rail.
The PA-410R and PA-410R-5G firewalls can be installed
on a DIN rail using the provided DIN rail mounting clip.
- Using four M4 screws, install the DIN rail mounting clip to the back panel of
the device. Ensure that you orient the firewall so that the bottom panel of the device is facing downwards and the
DIN rail mounting clip aligns with the DIN rail.
![]()
- Using slight downward pressure, attach the firewall onto the DIN rail so that
the two metal clips lock into place.
![]()
Keep the device clean and clear of dust to ensure optimal heat dissipation and maintain proper hardware operation.
