PA-400R Series Back Panel
Table of Contents
PA-400R Series Back Panel
Learn about the PA-400R Series firewall back-panel components.
View the back panel components of your PA-400R Series firewall.
The back panels of the
PA-410R and PA-410R-5G are identical. The following image shows the back panel
of the PA-410R and the table describes each back panel component.
| Item | Component | Description |
|---|---|---|
|
1
|
DIN rail mounting clip
|
Use this mounting clip to Install the PA-400R Series Firewall on a DIN Rail
The four holes around the DIN rail clip can be used with a
100 x 100 VESA wall mount. |
The following image shows the back panel of the PA-450R. There are no
serviceable components on the back panel.
The following image shows the back panel of the
PA-450R-5G. There are no serviceable components on the back panel.
The following image shows the back
panel of the PA-455R-5G and the table describes each back panel component.
| Item | Component | Description |
|---|---|---|
|
1
|
Pole/wall mount holes
|
Five screw holes that enable you to install the firewall on a pole or
wall. To pole mount the firewall, you must first install the wall mount
bracket.
|
|
2
|
Back cover heat sink
|
A heat sink cover that helps to dissipate heat from the firewall.
The heat sink cover should
not be removed at any point. |
|
3
|
Lifting eyebolt
|
An eyebolt that is used for lifting or carrying the firewall during
installation.
The eyebolt is not intended
to be used as a mount or attachment to a fixed structure. |