To access the Policy page of a device profile, select

Profiles >

profile_name

> Policy

.

This page lists all the policy sets that were created for the device profile, when they were last updated, whether they were activated, and if so, when. When there are no policy sets for a device profile, the Policy page is empty.

If you create a policy set for a device profile and save it without activating it, it’s added to the Policy page. In this case, there’s a dash in the Last Set as Active column.

After you activate a policy set, it’s marked with an Active label and

IoT Security

adds a timestamp in the Last Set as Active column.

If you later deactivate the policy set, the Active label is removed. However, the timestamp in the Last Set as Active column remains indicating that it once was active and when.

New behaviors are behaviors discovered on the network after the active policy set was activated or last updated. Unexpected behaviors are behaviors that were explicitly not permitted when the policy set was activated or last updated but have since appeared on the network, which means the enforcement implemented in a next-generation firewall is missing them. If

IoT Security

detects new or unexpected behaviors on the network after some time has passed since the policy set was first activated, it lists them on the

Assets

Profiles

>

profile_name

>

Policy

page and presents you with an opportunity to modify the active policy set to account for these behaviors.

When integrating

IoT Security

with Cisco ISE, you can send ISE automatically generated ACL rule sets for IoT devices. For information about providing ISE with access control lists for IoT devices, see Apply Access Control Lists through Cisco ISE.