Parts List and Required Tools
Table of Contents
Expand all | Collapse all
-
- Install the PA-400R Series Firewall on a Flat Surface
- Install the PA-400R Series Firewall on a Wall
- Install the PA-400R Series Firewall on a Pole
- Install the PA-400R Series Firewall in an Equipment Rack
- Install the PA-400R Series Firewall on a DIN Rail
- Install Antennas on the PA-400R Series 5G Firewall
- Insert a SIM Card into a PA-400R Series Firewall
- Set Up a Connection to the Firewall
Parts List and Required Tools
Review the items that are shipped with the PA-400R Series firewall and learn what
tools are needed for installing the hardware.
The following table lists the items that are shipped with the PA-400R Series
firewall.
| Quantity | Item |
|---|---|
|
1
|
PA-410R or PA-410R-5G firewall
|
|
2
|
DC terminal block and connector
|
|
1
|
8 AWG Single-Hole or Dual-Hole Ground lug.
|
|
1
|
USB to RJ-45 Console cable.
|
|
1
|
Shielded RJ-45 CAT6 Ethernet cable for management (MGT) port
access
|
|
4
|
(5G only) Multi-band antennas
|
|
1
|
Limited Warranty Sheet
|
|
1
|
China RoHS declaration.
|
| Quantity | Item |
|---|---|
|
1
|
PA-450R or PA-450R-5G firewall
|
|
2
|
Euroblock connector and terminal block
|
|
1
|
#10 Ground lug
|
|
1
|
Console cable
|
|
1
|
Shielded RJ-45 CAT6 Ethernet cable for management (MGT) port
access
|
|
4
|
(5G only) Multi-band antenna
|
|
1
|
Limited Warranty Sheet
|
|
1
|
China RoHS declaration.
|
| Quantity | Item |
|---|---|
|
1
|
PA-455R-5G firewall
|
|
1
|
Shielded RJ-45 CAT6 Ethernet cable for management (MGT) port
access
|
|
1
|
USB to micro USB console cable
|
|
1
|
8AWG dual-hole ground lug
|
|
2
|
#10-32 x 0.5 screws
|
|
5
|
3/8” - 16 x 0.375 screws
|
|
8
|
5/16” anchor screws
|
|
1
|
SIM card tweezer tool
|
|
8
|
Torx T-45 screws
|
|
1
|
3/8” drill bit
|
|
2
|
Power cable connectors
|
|
1
|
Wall mount bracket adapter
|
|
1
|
Eyebolt
|
The following tools are either required or recommended when installing the PA-400R Series
firewall hardware.
- ESD wrist strap
- Equipment rack screws
PA-410R and PA-410R-5G
- 1/8” flat head screwdriver for terminal block screws
- Crimp tool for #10 ground lug and 8 AWG wire
- Wire strippers for 8 AWG and 16 AWG wire
PA-450R and PA-450R-5G
- #2 Phillips-head screwdriver for #6-32 screws
- 1/8” flat head screwdriver for terminal block screws
- Crimp tool for #10 ground lug and 8 AWG wire
- Wire strippers for 8 AWG and 16 AWG wire
PA-455R-5G
- Mechanical lift or hoist
- Drill or hammer drill
- T-45 Torx bit
- 1.43cm (9/16”) SAE wrench or torque driver capable of reaching 27nm (20 ft-lbs) torque
- Torque driver or wrench capable of reaching 14nm (11 ft-lbs) torque