Learn how to connect cables to the PA-400R Series Firewall and install the secure
panel.
The following procedures describe how to install the waterproof cabling and
protective panel of the PA-410R
, PA-455R-5G, and
PA-410R-5G firewall. The process to connect the power cables is covered in
Connect Power to a PA-400R Series Firewall.
(PA-410R and PA-410R-5G) You must use IP65 rated cable glands if you
want to provide IP65 ingress protection for the firewall. Cable glands can be
purchased separately from Palo Alto Networks or from another supplier.
The PAN-PA-RGD-GLND1 includes one M20 (for one power cable) and three M12 glands
(for three RJ-45 cables). The PAN-PA-RGD-GLND2 includes a gland for one fiber
cable. It takes two of each set to fully populate all the cables in the
firewall.
(
PA-455R-5G only)
The instructions outlined in
Connect Ethernet Cables to the PA-400R Series Firewall also apply to other cables installed in the bottom
panel, such as the USB and SFP cables. Before deployment, ensure that you have M20
cable glands that fit your cabling needs.