Interpret the PA-5400 Series DPC-A LEDs

Learn how to interpret the PA-5400 DPC-A LEDs to monitor the status of the card hardware.
Use the following information to learn how to interpret the LED dashboard and port LEDs on the PA-5400 Series Firewall Data Processing Card (DPC).
The following table describes the functions and states of the DPC LED dashboard.
LED
State
Description
TMP
(Temperature)
Green
The card temperature is normal.
Yellow
The card temperature is outside the temperature tolerance.
ALM
(Alarm)
Red
The card hardware failed.
Off
The card is operating normally.
STS (STATUS)
Green
The card is operating normally.
Yellow
The card is booting up.
PWR
Green
The card is powered on.
Off
The card is powered off.
SVC (Service)
Allows a remote administrator to illuminate the SVC LED on a specific front-slot card so an on-site technician can locate the card.
Enter the following command to view the status of the SVC LED on all cards that have this LED:
admin@PA-5450>
show system service-led status
Service LED Slot    Description Status s1      PA-5400-NC-A      On    s2      empty             Off   s3      PA-5400-DPC-A     On    s4      empty             Off   s5      empty             Off   s6      empty             Off   s7      PA-5400-MPC-A     On   
SVC (Continued)
Enter the following command to view the status for a card in a specific slot:
admin@PA-5450>
show system service-led status slot s3
Enter the following command to enable all SVC LEDs:
admin@PA-5450>
set system setting service-led enable yes
Enter the following command to disable the SVC LED:
admin@PA-5450>
set system setting service-led enable no
Enter the following command to enable the SVC LED on the card in a specific slot:
admin@PA-5450>
set system setting service-led enable slot s3 yes
Off
LED is off.
On
LED is solid blue.

Recommended For You