Upload a List of Static IP Devices
Table of Contents
Expand all | Collapse all
-
- Firewall and PAN-OS Support of IoT Security
- IoT Security Prerequisites
- Onboard IoT Security
- Onboard IoT Security on VM-Series with Software NGFW Credits
-
- DHCP Data Collection by Traffic Type
- Firewall Deployment Options for IoT Security
- Configure a Pre-PAN-OS 10.0 Firewall with a DHCP Server
- Configure a Pre-PAN-OS 10.0 Firewall for a Local DHCP Server
- Use a Tap Interface for DHCP Visibility
- Use a Virtual Wire Interface for DHCP Visibility
- Use SNMP Network Discovery to Learn about Devices from Switches
- Use ERSPAN to Send Mirrored Traffic through GRE Tunnels
- Use DHCP Server Logs to Increase Device Visibility
- Plan for Scaling when Your Firewall Serves DHCP
- Prepare Your Firewall for IoT Security
- Configure Policies for Log Forwarding
- Control Allowed Traffic for Onboarding Devices
- Support Isolated Network Segments
- IoT Security Integration with Prisma Access
- IoT Security Licenses
- Offboard IoT Security Subscriptions
-
- Introduction to IoT Security
- IoT Security Integration with Next-generation Firewalls
- IoT Security Portal
- Vertical-themed Portals
- Device-to-Site Mapping
- Sites and Site Groups
- Networks
- Reports
- IoT Security Integration Status with Firewalls
- IoT Security Integration Status with Prisma Access
- Data Quality Diagnostics
- Authorize On-demand PCAP
- IoT Security Integrations with Third-party Products
- IoT Security and FedRAMP
Upload a List of Static IP Devices
Add static IP devices to
IoT Security
by uploading a
list of them in a CSV file.If you have a list of the static IP addresses
for your devices, enter them in a CSV (comma-separated values) file
and upload it to
IoT Security
.There is a limit of 10,000
static IP devices for each uploaded CSV file. If you need to upload
more than 10,000, upload multiple CSV files.
- Navigate to the User-Defined Static IP Devices page () and then clickAssetsDevicesUser-Defined Static IP Devices.AddUpload Static IP Devices
- Click the link to download the CSV template.
- Fill out the template with static IP device information or create a new file in the same format as the template and fill that out.Enter the static IP address of each device you want to upload. Optionally enter its MAC address, vendor, and model in the columns indicated in the template.IoT Securityaccepts any of the following MAC address formats:aa:bb:cc:00:11:22AA:BB:CC:00:11:22aa.bb.cc.00.11.22AA.BB.CC.00.11.22aa-bb-cc-00-11-22AA-BB-CC-00-11-22aa bb cc 00 11 22AA BB CC 00 11 22aabbcc001122AABBCC001122IoT Securityuses IP addresses rather than MAC addresses to identify and track static IP devices. The additional user-configured attributes provide extra information when referring to entries on the User-Defined Static IP Devices page later. However, only the uploaded IP addresses and (if provided) MAC addresses will ever appear on the Devices and Device Details pages.
- Return to the User-Defined Static IP Devices page, click, choose or drag the completed CSV file onto the space in the dialog box, and thenAddUpload Static IP DevicesUpload.IfIoT Securitypreviously detected network activity from one of the uploaded IP addresses, it’s considered a match. The Device Matches counter at the top of the page increases incrementally and “matched” appears in the Result column for this IP address.IoT Securitythen adds the static IP device to its inventory and displays it on the Devices and Device Details pages. It takes several minutes forIoT Securityto check for potential matches with existing data and then update the inventory and static IP device list accordingly.IfIoT Securityhas not yet detected network activity for one of the uploaded IP addresses, it’s considered “not found”. In this case, the Devices Not Found counter increases incrementally and a dash appears in the Result column. IfIoT Securitylater discovers network activity for this IP address, it moves it from “not found” to “matched”, adds the static IP device to its inventory, and begins displaying it on the Devices and Device Details pages.If a user-defined MAC address is different from a MAC address IoT Security detects on the network, the detected MAC address overrides the user-defined one.