Select Log Forwarding Destinations
The Log Settings page allows you to configure log forwarding to:
- Panorama, SNMP trap receivers, email servers, Syslog servers, and HTTP servers—You can also add or remove tags from a source or destination IP address in a log entry; all log types except System logs and Configuration logs support tagging.
- Logging Service—If you have a Logging Service subscription and have enabled the Logging Service (Device > Setup > Management), then the firewall will send the logs to the Logging Service when you configure log forwarding to Panorama/Logging Service. Panorama will query the Logging Service to access the logs, to display the logs, and to generate reports.
- Azure Security Center—The integration with Azure Security Center is available only for VM-Series firewalls on Azure.
- If you launched the VM-Series firewall from Azure Security Center, a security policy rule with the log forwarding profiles is automatically enabled for you.
- If you launched the VM-Series firewall from the Azure Marketplace or using custom Azure templates, you must manually selectAzure-Security-Center-Integrationto forward System logs, User-ID logs, and HIP Match logs to Azure Security Center and use the Log Forwarding profile for other log types (see Objects > Log Forwarding).The free tier of Security Center is automatically enabled on your Azure subscription.
You can forward the following log types : System, Configuration, User-ID, HIP Match, and Correlation logs. To specify destinations for each log type,
Addone or more match list profiles (up to 64) and complete the fields described in the following table.
To forward Traffic, Threat, WildFire Submissions, URL Filtering, Data Filtering, Tunnel Inspection, GTP, and Authentication logs, you must configure a Log Forwarding profile (see Objects > Log Forwarding).
Match List Profile Settings
Enter a name (up to 31 characters) to identify the match list profile. A valid name must start with an alphanumeric character and can contain zeros, alphanumeric characters, underscores, hyphens, periods, or spaces.
By default, the firewall forwards
All Logsof the type for which you add the match list profile. To forward a subset of the logs, open the drop-down and select an existing filter or select
Filter Builderto add a new filter. For each query in a new filter, specify the following fields and
To display or export the logs that the filter matches, select
View Filtered Logs. This tab provides the same options as the
Monitoringtab pages (such as
Set the filter to forward logs for all event severity levels (the default filter is
All Logs). To create separate log forwarding methods for different severity levels, specify one or more severity levels in the
Filter, configure a
Forward Method, and then repeat the process for the rest of the severity levels.
Enter a description (up to 1,023 characters) to explain the purpose of this match list profile.
Panorama/Logging Serviceif you want to forward logs to the Logging Service, Log Collectors or the Panorama management server. If you enable this option, you must configure log forwarding to Panorama .
You cannot forward Correlation logs from firewalls to Panorama. Panorama generates Correlation logs based on the firewall logs it receives.
You can select from two types of built-in actions when you
Addan action to perform—Tagging and Integration.
To add a device to the quarantine list based on the log forwarding profile filter, select
Recommended For You
Recommended videos not found.