Create and configure an LFC subinterface for logging
on multi-vsys.
If you have enabled multiple virtual system
(multi-vsys) capability on a PA-7000 Series firewall with a Log
Forwarding Card (LFC) installed, you can configure logging for different
virtual systems. The LFC can then forward logs to a Panorama Log
Collector or syslog server.
You can choose to configure
only the physical interface. Because syslog forwarding via subinterfaces
is not yet supported on LFCs, each virtual system uses the single
untagged physical interface.
If
you configure an LFC subinterface to forward logs externally, the
interfaces will no longer work as expected.
To configure
a separate subinterface for each virtual system, add subinterfaces to
the physical interface and assign the necessary tag to segment the
subinterface traffic.
For a PA-7000 Series firewall
managed by a Panorama management server, you cannot override or
revert the LFC configuration locally on the firewall if the LFC
configuration is pushed from Panorama. To override the LFC configuration
pushed from Panorama, you must
log in to the firewall CLI and
delete the Panorama pushed configuration.
admin> configure
admin# delete deviceconfig log-fwd-card