Strata Copilot
    Next-Gen Trust Security
    : Create an A10 Thunder ADC machine
    Focus
    Focus
    1. Home
    2. Next‑Gen Trust Security
    3. Next-Gen Trust Security
    4. Next-Gen Trust Security overview
    5. Welcome to installations
    6. About machines
    7. Create a new machine
    8. Create an A10 Thunder ADC machine

    Next-Gen Trust Security

    Create an A10 Thunder ADC machine

    Table of Contents

    Create an A10 Thunder ADC machine

    Creating a machine enables Next-Gen Trust Security to connect directly to an A10 Thunder ADC so certificates can be provisioned to its keystores. After creating the machine, you can provision certificates to it.

    Before you begin

    • The hostname or IP address of the A10 Thunder ADC.
    • The port number, if the ADC uses a port other than 443.
    • Administrator credentials for the A10 Thunder ADC.
    • (Optional) Shared credentials stored in a supported credential provider.
    • Supported A10 Thunder ADC version: 5.2.0, build 155.
    1. In A10 Thunder ADC Address/Hostname, enter the hostname or IP address of the A10 Thunder ADC.
    2. If the A10 Thunder ADC uses a port other than 443, enter the port number in Port.
    3. (Optional) From Credential Type, select one of the following:
      • Enter Credentials to provide credentials manually.
      • Select Credentials to use shared credentials from a configured credential provider.
      Note: The available credential options depend on your environment configuration.
    4. If you selected Enter Credentials, enter the administrator Username and Password.
    5. If you selected Select Credentials, choose the appropriate credential from the Credential list.
    6. Click Test Access to verify connectivity.
    7. Click Create. The Create button is enabled only after the connection test succeeds.

    What's next?

    © 2026 Palo Alto Networks, Inc. All rights reserved.