: Schedule a Content Update Using Panorama
Focus
Focus

Schedule a Content Update Using Panorama

Table of Contents

Schedule a Content Update Using Panorama

Panorama™ requires a direct internet connection for scheduling Supported Updates on firewalls, Log Collectors, and WildFire® appliances and appliance clusters. Otherwise, you can perform only on-demand updates. (To schedule Antivirus, WildFire, or BrightCloud URL updates for Log Collectors, the Log Collectors must be running Panorama 7.0.3 or a later release.) Each firewall, Log Collector, or WildFire appliance or appliance cluster receiving an update generates a log to indicate that the installation succeeded (a Config log) or failed (a System log). To schedule updates on the Panorama management server, see Install Updates for Panorama with an Internet Connection.
Before deploying updates, see Panorama, Log Collector, Firewall, and WildFire Version Compatibility for important details about content release version compatibility. Refer to the Release Notes for the minimum content release version you must install for a Panorama release.
Panorama can download only one update at a time for updates of the same type. If you schedule multiple updates of the same type to download during the same time Recurrence, only the first download succeeds.
If your firewalls connect directly to the Palo Alto Networks® Update Server, you can also use Panorama templates (
Device
Dynamic Updates
) to push content update schedules to the firewalls. If you want to delay the installation of updates for a period after they are released, you must deploy schedules using templates. In rare instances, a content update includes errors; specifying a delay increases the likelihood that Palo Alto Networks will identify and remove such an update from the Update Server before your firewalls install it.
Perform the following steps for each update type you want to schedule.
  1. Select
    Panorama
    Device Deployment
    Dynamic Updates
    , click
    Schedules
    , and
    Add
    a schedule.
  2. Specify a
    Name
    (to identify the schedule), the update
    Type
    , and the update frequency (
    Recurrence
    ). The frequency options depend on the update
    Type
    .
    PAN-OS® uses the Panorama timezone for update scheduling.
    If you set the
    Type
    to
    App and Threat
    , Log Collectors install and need only the Applications content, not the Threats content. Firewalls use both Applications and Threats content. For details, see Panorama, Log Collector, Firewall, and WildFire Version Compatibility.
  3. Select one of the following schedule actions and then select the firewalls or Log Collectors:
    • Download And Install
      (
      Best Practice
      )—Select
      Devices
      (firewalls),
      Log Collectors
      , or
      WildFire Appliances and Clusters
      .
    • Download Only
      —Panorama downloads the update but does not install it.
  4. Click
    OK
    .
  5. Select
    Commit
    Commit to Panorama
    and then
    Commit
    your changes.

Recommended For You