Focus

Disable NAT for a Specific Host or Interface

Table of Contents

Disable source NAT or destination NAT for a specific host or interface.

Where Can I Use This?	What Do I Need?
NGFW (Managed by PAN-OS or Panorama)

You can configure both source and destination NAT rules to disable address translation. You may have exceptions where you don't want NAT to occur for a certain host in a subnet or for traffic exiting a specific interface. The following procedure shows how to disable source NAT for a host.

Create the NAT policy.
1. Select PoliciesNAT and click Add a descriptive Name for the policy.
2. On the Original Packet tab, select the zone you created for your internal network in the Source Zone section (click Add and then select the zone) and the zone you created for the external network from the Destination Zone list.
3. For Source Address, Add the host address. Click OK.
4. On the Translated Packet tab, select None from the Translation Type list in the Source Address Translation section of the screen.
5. Click OK.
Commit your changes.

NAT rules are processed in order from the top to the bottom, so place the NAT exemption policy before other NAT policies to ensure it is processed before an address translation occurs for the sources you want to exempt.

Reserve Dynamic IP NAT Addresses

NAT Configuration Examples

Next-Generation Firewall Docs

Disable NAT for a Specific Host or Interface

Next-Generation Firewall Docs

Disable NAT for a Specific Host or Interface

Activation & Onboarding

Next-Generation Firewalls

Cloud-Delivered Security Services

Network Security

Visibility & Monitoring

Best Practices

Experts Corner

Technical Documentation

Company

Legal Notices