A Collector Group is 1 to 16 Log Collectors
that operate as a single logical unit for collecting firewall logs.
You must assign at least one Log Collector to a Collector Group
for firewalls to successfully send logs to a Log Collector. Firewall
logs are dropped if there is no Collector Group configured or none
of the Log Collectors are assigned to a Collector Group. You can
configure a Collector Group with multiple Log Collectors to ensure
log redundancy or to accommodate logging rates that exceed the capacity
of a single Log Collector (see Panorama
Models). To understand the risks and recommended mitigations,
for a Collector Group with Multiple Log Collectors.
The M-600, M-500, M-200 and M-100 appliances in Panorama mode
have a predefined Collector Group that contains a predefined local
Log Collector. You can edit all the settings of the predefined Collector
Group except its name (default).
If you delete a Collector Group, you will
Palo Alto Networks recommends preserving the predefined
Log Collector and Collector Group on the Panorama management server,
regardless of whether Panorama also manages Dedicated Log Collectors.
you switch an M-Series appliance from Panorama mode to Log Collector
mode, the appliance will lose its predefined Collector Group and
Log Collector. You would then have to Set
Up the M-Series Appliance as a Log Collector, add it as a
managed collector to Panorama, and configure a Collector Group to
contain the managed collector.