Migrate from an M-100 Appliance to an M-500 Appliance

Plan the migration.
Upgrade the software on the M-100 appliance if its current release is earlier than 7.0; the M-500 appliance requires Panorama 7.0 or a later release. For important details about software versions, see Panorama, Log Collector, Firewall, and WildFire Version Compatibility.
Forward the System and Config logs that Panorama and Log Collectors generate to an external destination before the migration if you want to preserve those logs. The M-Series appliance in Panorama mode stores these log types on its SSD, which you cannot move between models. You can move only the RAID drives, which store firewall logs.
Schedule a maintenance window for the migration. Although firewalls can buffer logs after the M-100 appliance goes offline and then forward the logs after the M-500 appliance comes online, completing the migration during a maintenance window minimizes the risk that logs will exceed the buffer capacities and be lost during the transition between Panorama models.
Purchase the new M-500 appliance, and migrate your subscriptions to the new appliance.
Purchase the new M-500 appliance.
Purchase the new support license and migration license.
At the time you purchase the new M-500 appliance, provide your sales representative the serial number and device management auth-code of the M-100 appliance you are phasing out, as well as a license migration date of your choosing. On receipt of your M-500 appliance, register the appliance and activate the device management and support licenses using the migration and support auth-codes provided by Palo Alto Networks. On the migration date, the device management license on the M-100 is decommissioned, and you can no longer manage devices or collect logs using the M-100 appliance. However, the support license is preserved and the Panorama appliance remains under support. You can complete the migration after the effective date, but you are unable to commit any configuration changes on the now decommissioned M-100 appliance.
Export the Panorama configuration from each M-100 appliance in Panorama mode.
Perform this task on each M-100 appliance HA peer:
Log in to the M-100 appliance and select
Panorama
Setup
Operations
.
Click
Save named Panorama configuration snapshot
, enter a
Name
to identify the configuration, and click
OK
.
Click
Export named Panorama configuration snapshot
, select the
Name
of the configuration you just saved, and click
OK
. Panorama exports the configuration to your client system as an XML file.
Power off each M-100 appliance in Panorama mode.
Log in to the M-100 appliance HA peer that you will power off.
Select
Panorama
Setup
Operations
, and click
Shutdown Panorama
.
Perform the initial setup of each M-500 appliance.
Rack mount the M-500 appliances. Refer to the M-500 Appliance Hardware Reference Guide for instructions.
Perform Initial Configuration of the M-Series Appliance to define the network connections required to activate licenses and install updates.
Register Panorama.
Activate a Panorama Support License.
Activate a firewall management license. Use the auth-code associated with the migration license.
Install Content and Software Updates for Panorama. Install the same versions as those on the M-100 appliance.
(
Dedicated Log Collector only
) Set Up the M-Series Appliance as a Log Collector.
Load the Panorama configuration snapshot that you exported from each M-100 appliance into each M-500 appliance in Panorama mode (both HA peers).
The Panorama
Policy
rule
Creation
and
Modified
dates are updated to reflect the date you commit the imported Panorama configuration on the new Panorama. The universially unique identifier (UUID) for each policy rule persists when you migrate the Panorama configuration.
The
Creation
and
Modified
for managed firewalls are not impacted when you monitor policy rule usage for a managed firewall because this data is stored locally on the managed firewall and not on Panorama.
Perform this task on each M-500 appliance HA peer:
Log in to the M-500 appliance and select
Panorama
Setup
Operations
.
Click
Import named Panorama configuration snapshot
,
Browse
to the configuration file you exported from the M-100 appliance that has the same HA priority (primary or secondary) as the M-500 appliance will have, and click
OK
.
Click
Load named Panorama configuration snapshot
, select the
Name
of the configuration you just imported, select a
Decryption Key
(the master key for Panorama), and click
OK
. Panorama overwrites its current candidate configuration with the loaded configuration. Panorama displays any errors that occur when loading the configuration file. If errors occurred, save them to a local file. Resolve each error to ensure the migrated configuration is valid.
Select
Commit
Commit to Panorama
and
Validate Commit
. Resolve any errors before proceeding.
Commit
your changes to the Panorama configuration.
Synchronize the configuration between the M-500 appliance HA peers in Panorama mode.
On the active M-500 appliance, select the
Dashboard
tab and, in the High Availability widget, click
Sync to peer
.
In the High Availability widget, verify that the
Local
(primary M-500 appliance) is
active
, the
Peer
is passive, and the
Running Config
is
synchronized
.
Move the RAID drives from each M-100 appliance to its replacement M-500 appliance to migrate the logs collected from firewalls.
In the following tasks, skip any steps that you already completed on the M-500 appliance.
Migrate Logs to a New M-Series Appliance in Panorama Mode. Migrate logs from the M-100 appliance only if it uses a default managed collector for log collection.
Migrate Logs to a New M-Series Appliance in Log Collector Mode.
Synchronize the active M-500 appliance in Panorama mode with the firewalls to resume firewall management.
Complete this step during a maintenance window to minimize network disruption.
In the active M-500 appliance, select
Panorama
Managed Devices
, and verify that the Device State column displays
Connected
for the firewalls.
At this point, the Shared Policy (device groups) and Template columns display
Out of sync
for the firewalls.
Push your changes to device groups and templates:
Select
Commit
Push to Devices
and
Edit Selections
.
Select
Device Groups
, select every device group,
Include Device and Network Templates
, and click
OK
.
Push
your changes.
In the
Panorama
Managed Devices
page, verify that the Shared Policy and Template columns display
In sync
for the firewalls.