Monitor a WildFire Cluster
Where Can I Use
This? | What Do I Need? |
You can check the operational status of your WildFire cluster
using the CLI or Panorama. This allows you to verify that the
applications and
services running on a given node
is functioning correctly. For a WildFire cluster to run correctly,
the appropriate services and applications must be active on each
node, and the status for each must be in the healthy state. Clusters
operating outside these parameters might not run under optimal conditions
or might indicate other problems and configuration issues.
The CLI displays information that is not available from Panorama.
It’s highly recommended to use the WildFire CLI when troubleshooting
cluster-related issues.
You can view the current status of a WildFire controller node
by executing a series of show commands from the WildFire CLI. The
commands display configuration details, the current applications
and services running on the appliance, as well as status/error messages.
You can then use these details to determine the status of your cluster.
Viewing the status does not interrupt any WildFire services and
can be run at any time.
See the following sections for details on monitoring your WildFire
appliance: