Upgrade Log Collectors When Panorama Is Internet-Connected
Table of Contents
9.1 (EoL)
Expand all | Collapse all
-
- Determine Panorama Log Storage Requirements
-
- Setup Prerequisites for the Panorama Virtual Appliance
- Perform Initial Configuration of the Panorama Virtual Appliance
- Set Up The Panorama Virtual Appliance as a Log Collector
- Set Up the Panorama Virtual Appliance with Local Log Collector
- Set up a Panorama Virtual Appliance in Panorama Mode
- Set up a Panorama Virtual Appliance in Management Only Mode
-
- Preserve Existing Logs When Adding Storage on Panorama Virtual Appliance in Legacy Mode
- Add a Virtual Disk to Panorama on an ESXi Server
- Add a Virtual Disk to Panorama on vCloud Air
- Add a Virtual Disk to Panorama on AWS
- Add a Virtual Disk to Panorama on Azure
- Add a Virtual Disk to Panorama on Google Cloud Platform
- Add a Virtual Disk to Panorama on KVM
- Add a Virtual Disk to Panorama on Hyper-V
- Mount the Panorama ESXi Server to an NFS Datastore
-
- Increase CPUs and Memory for Panorama on an ESXi Server
- Increase CPUs and Memory for Panorama on vCloud Air
- Increase CPUs and Memory for Panorama on AWS
- Increase CPUs and Memory for Panorama on Azure
- Increase CPUs and Memory for Panorama on Google Cloud Platform
- Increase CPUs and Memory for Panorama on KVM
- Increase CPUs and Memory for Panorama on Hyper-V
- Complete the Panorama Virtual Appliance Setup
-
- Convert Your Evaluation Panorama to a Production Panorama with Local Log Collector
- Convert Your Evaluation Panorama to a Production Panorama without Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing with Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing without Local Log Collector
- Convert Your Production Panorama to an ELA Panorama
-
- Register Panorama
- Activate a Panorama Support License
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is Internet-connected
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is not Internet-connected
- Activate/Retrieve a Firewall Management License on the M-Series Appliance
- Install the Panorama Device Certificate
-
- Migrate from a Panorama Virtual Appliance to an M-Series Appliance
- Migrate a Panorama Virtual Appliance to a Different Hypervisor
- Migrate from an M-Series Appliance to a Panorama Virtual Appliance
- Migrate from an M-100 Appliance to an M-500 Appliance
- Migrate from an M-100 or M-500 Appliance to an M-200 or M-600 Appliance
-
- Configure an Admin Role Profile
- Configure an Access Domain
-
- Configure a Panorama Administrator Account
- Configure Local or External Authentication for Panorama Administrators
- Configure a Panorama Administrator with Certificate-Based Authentication for the Web Interface
- Configure an Administrator with SSH Key-Based Authentication for the CLI
- Configure RADIUS Authentication for Panorama Administrators
- Configure TACACS+ Authentication for Panorama Administrators
- Configure SAML Authentication for Panorama Administrators
-
- Add a Firewall as a Managed Device
-
- Add a Device Group
- Create a Device Group Hierarchy
- Create Objects for Use in Shared or Device Group Policy
- Revert to Inherited Object Values
- Manage Unused Shared Objects
- Manage Precedence of Inherited Objects
- Move or Clone a Policy Rule or Object to a Different Device Group
- Push a Policy Rule to a Subset of Firewalls
- Manage the Rule Hierarchy
- Manage the Master Key from Panorama
- Redistribute User-ID Information to Managed Firewalls
-
- Plan the Transition to Panorama Management
- Migrate a Firewall to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall to Panorama Management and Push a New Configuration
- Migrate a Firewall HA Pair to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall HA Pair to Panorama Management and Push a New Configuration
- Load a Partial Firewall Configuration into Panorama
- Localize a Panorama Pushed Configuration on a Managed Firewall
-
- Add Standalone WildFire Appliances to Manage with Panorama
- Configure Basic WildFire Appliance Settings on Panorama
- Remove a WildFire Appliance from Panorama Management
-
-
- Configure a Cluster and Add Nodes on Panorama
- Configure General Cluster Settings on Panorama
- Remove a Cluster from Panorama Management
- Configure Appliance-to-Appliance Encryption Using Predefined Certificates Centrally on Panorama
- Configure Appliance-to-Appliance Encryption Using Custom Certificates Centrally on Panorama
- View WildFire Cluster Status Using Panorama
- Upgrade a Cluster Centrally on Panorama with an Internet Connection
- Upgrade a Cluster Centrally on Panorama without an Internet Connection
-
-
- Manage Licenses on Firewalls Using Panorama
-
- Supported Updates
- Schedule a Content Update Using Panorama
- Upgrade Log Collectors When Panorama Is Internet-Connected
- Upgrade Log Collectors When Panorama Is Not Internet-Connected
- Upgrade Firewalls When Panorama Is Internet-Connected
- Upgrade Firewalls When Panorama Is Not Internet-Connected
- Upgrade a ZTP Firewall
- Revert Content Updates from Panorama
-
- Preview, Validate, or Commit Configuration Changes
- Enable Automated Commit Recovery
- Compare Changes in Panorama Configurations
- Manage Locks for Restricting Configuration Changes
- Add Custom Logos to Panorama
- Use the Panorama Task Manager
- Reboot or Shut Down Panorama
- Configure Panorama Password Profiles and Complexity
-
-
- Verify Panorama Port Usage
- Resolve Zero Log Storage for a Collector Group
- Replace a Failed Disk on an M-Series Appliance
- Replace the Virtual Disk on an ESXi Server
- Replace the Virtual Disk on vCloud Air
- Migrate Logs to a New M-Series Appliance in Log Collector Mode
- Migrate Logs to a New M-Series Appliance in Panorama Mode
- Migrate Logs to a New M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Logs to the Same M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Log Collectors after Failure/RMA of Non-HA Panorama
- Regenerate Metadata for M-Series Appliance RAID Pairs
- Troubleshoot Registration or Serial Number Errors
- Troubleshoot Reporting Errors
- Troubleshoot Device Management License Errors
- Troubleshoot Automatically Reverted Firewall Configurations
- Complete Content Update When Panorama HA Peer is Down
- View Task Success or Failure Status
- Restore an Expired Device Certificate
- Downgrade from Panorama 9.1
End-of-Life (EoL)
Upgrade Log Collectors When Panorama Is Internet-Connected
Upgrade Log Collector software to PAN-OS® 9.1 and install
content updates using Panorama™ when Panorama is connected to the
internet.
For a list of software or content updates
you can install on Log Collectors, see Supported
Updates.
You must upgrade all Log Collectors in a collector
group at the same time to avoid losing log data loss. No log forwarding
or log collection occurs if the Log Collectors in a collector group
are not all running the same PAN-OS version. Additionally, the log
data for the Log Collectors in the collector group is not visible
in the
ACC
or Monitor
tabs
until all Log Collectors are running the same PAN-OS version. For example,
if you have three Log Collectors in a collector group and you upgrade
two of the Log Collectors, then no logs are forwarded to any Log
Collectors in the collector group.If you are upgrading from
PAN-OS 8.1, PAN-OS® 9.0 introduced a new log data format for local
and Dedicated Log Collectors. On your upgrade path to PAN-OS 10.0, existing
log data is automatically migrated to the new format when you upgrade
to PAN-OS 9.0. During reformatting, log data is not visible in the
ACC
or Monitor
tabs. Additionally,
new log data is not forwarded to Log Collectors until reformatting
is complete. While the reformatting takes place, new logs are written
to the firewall system disk and after the procedure is successfully
completed, the new logs are forwarded to the appropriate Log Collector.Palo
Alto Networks recommends that you upgrade Log Collectors during
a maintenance window. Due to log format migration, the entire upgrade
procedure takes an additional number of hours depending on the amount
of log data on the local and Dedicated Log Collectors.
For
M-100 appliances, Palo Alto Networks requires upgrading the memory
to 32GB or more for management and log collection tasks. See the M-100 Memory Upgrade Guide before
upgrading your M-100 appliance to PAN-OS 9.1.0.
- Before you upgrade Log Collectors, ensure that you are running the appropriate Panorama™ software release on the Panorama management server.Palo Alto Networks® highly recommends that Panorama and Log Collectors run the same Panorama software release and that Panorama, Log Collectors, and all managed firewalls run the same content release version. For important software and content compatibility details, see Panorama, Log Collector, Firewall, and WildFire Version Compatibility.Panorama must be running the same (or later) software release as Log Collectors but must have the same or an earlier content release version:
- Software release version—If your Panorama management server is not already running the same or a later software release than the release to which you intend to update Log Collectors, then you must install the same or a later Panorama release on Panorama (see Install Content and Software Updates for Panorama) before you update any Log Collectors.
- Content release version—For content release versions, you should ensure that all Log Collectors are running the latest content release version or, at minimum, running a later version than is running on Panorama; if not, then first update managed firewalls (using Panorama) and then update Log Collectors before you update the content release version on the Panorama management server.
To check software and content versions:- Panorama management server—To determine which software and content versions are running on the Panorama management server, log in to the Panorama web interface and go to General Information settings (Dashboard).
- Log Collectors—To determine which software and content versions are running on Log Collectors, log in to the CLI of each Log Collector and run theshow system infocommand.
- You cannot skip the installation of any feature release versions in the path from the currently running PAN-OS version to PAN-OS 9.1. Review the known issues and changes to default behavior in the Release Notes and upgrade/downgrade considerations in the New Features Guide for each release through which you pass as part of your upgrade path.If upgrading more than one Log Collector, streamline the process by determining the upgrade paths for all Log Collectors you intend to upgrade before you start downloading images.
- Install the latest content updates.Refer to the Release Notes for the minimum content release versions required for a Panorama software release.
- SelectandPanoramaDevice DeploymentDynamic UpdatesCheck Nowfor the latest updates. If an update is available, the Action column displays aDownloadlink.
- If not already installed,Downloadthe appropriate content updates. After a successful download, the link in the Action column changes fromDownloadtoInstall.
- Installthe content update (Applications and Threats update) before any others.If your subscription includes both Applications and Threats content, install theAppscontent first. This automatically installs both Application and Threats content.Regardless whether your subscription includes both Applications and Threats content, Panorama installs and needs only the Applications content. For details, see Panorama, Log Collector, Firewall, and WildFire Version Compatibility.
- Repeat the substeps above for any other updates (Antivirus, WildFire, or URL Filtering) as needed, one at a time, and in any sequence.
- Upgrade the Log Collector to the PAN-OS releases along your upgrade path to PAN-OS 10.0.If upgrading more than one Log Collector, streamline the process by determining the upgrade paths for all Log Collectors you intend to upgrade before you start downloading images.
- Upgrade Log Collectors When Panorama is Internet-Connected to PAN-OS 8.1.
- Upgrade Log Collectors When Panorama is Internet-Connected to PAN-OS 9.0.PAN-OS 9.0 introduced a new log format. Logs are automatically migrated to the new format after you successfully upgrade the Log Collector to PAN-OS 9.0.Do not continue on your upgrade path until you verify the automatic log migration completed successfully.
- Upgrade the Log Collector to PAN-OS 9.1.
- On Panorama,Check Now() for the latest updates. If an update is available, the Action column displays aPanoramaDevice DeploymentSoftwareDownloadlink.
- For each release in your upgrade path,Downloadthe model-specific file for the release version to which you are upgrading. For example, to upgrade an M-Series appliance to Panorama 9.1.0, download thePanorama_m-9.1.0image.After a successful download, the Action column changes fromDownloadtoInstallfor that image.
- InstallPAN-OS 9.1 and select the appropriate Log Collectors.
- Select one of the following depending on your needs:
- Upload only to device (do not install).
- Reboot device after install.
- ClickOKto start the upload or installation.
- Verify the software and content update versions that are installed on the Log Collector.Enter theshow system infooperational command. The output will resemble the following:sw-version: 9.1.0 app-version: 8085-5112 app-release-date: 2018/10/29 18:21:51