>
    PAN-OS 10.2.8 Addressed Issues
    Focus
    Download PDF
    Focus
    1. Home
    2. PAN-OS
    3. PAN-OS 10.2.8 Known and Addressed Issues
    4. PAN-OS 10.2.8 Addressed Issues
    Download PDF

    PAN-OS 10.2.8 Addressed Issues

    Table of Contents

    PAN-OS 10.2.8 Addressed Issues

    PAN-OS 10.2.8 addressed issues.
    Issue ID
    Description
    PAN-242561
    Fixed an issue where GlobalProtect tunnels disconnected shortly after being established when SSL was used as the transfer protocol.
    PAN-240197
    Fixed an issue where configuration changes made in Panorama and pushed to the firewall weren’t reflected on the firewall.
    PAN-240174
    Fixed an issue where, when LSVPN serial numbers and IP address authentication were enabled, IPv6 address ranges and complete IPv6 addresses that were manually added to the IP address allow or exclude list were not usable after a restart of the gp_broker process or the firewall.
    PAN-239241
    Extended the root certificate for WildFire appliances to December 31, 2032.
    PAN-239144
    Fixed an issue where the web interface was slower than expected when logging in, committing, and pushing changes after upgrading to PAN-OS 10.2.7.
    PAN-237876
    Extended the firewall Panorama root CA certificate which was previously set to expire on April 7th, 2024.
    PAN-237871
    (
    WF-500 appliances and PAN-DB private cloud deployments only
    ) Fixed an issue where the
    root-cert
     was set to expire on December 31, 2023. With this fix, the expiration date has been extended.
    PAN-237454
    Fixed an issue where Panorama stopped redistributing IP address-to-username mappings when packet loss occurred between the distributor and the client.
    PAN-236244
    Fixed an issue where you were unable to select authentication profiles via the web interface.
    PAN-236233
    Fixed an issue where SNMP reports displayed incorrect values for SSL Proxy sessions and SSL Proxy utilization.
    PAN-235741
    Fixed an issue where DNS resolution failed for Panorama and firewall plugins if the DNS Server IP address was obtained through DHCP.
    PAN-235737
    Fixed an issue where the brdagent process stopped responding due to a sudden increase in logging to the bcm.log.
    PAN-235628
    Fixed an issue where you weren’t prompted for login credentials when you disconnected and connected back to the GlobalProtect portal when SAML authentication was selected along with single sign-on (SSO) and Single Log Out (SLO).
    PAN-235557
    Fixed an issue where uploads from tunnels, including GlobalProtect, were slower than expected when the inner and outer sessions were on different dataplanes.
    PAN-234852
    Fixed an issue where DLP logs for the Salesforce application had a report ID of 0 and did not include missing information such as file type, file hash, and the reason for data filtering.
    PAN-234279
    Fixed an issue where the ikemgr process crashed due to an IKEv1 timing issue, which caused commits to fail with the following error message:
    Client ikemgr requesting last config in the middle of a commit/validate, aborting current commit
    .
    PAN-233954
    Fixed an issue where the firewall was unable to retrieve correct groups from the LDAP server.
    PAN-233207
    Fixed an issue where the configd process stopped responding when a partial configuration revert operation was performed.
    PAN-233191
    (
    PA-5450 firewalls only
    ) Fixed an issue where the Data Processing Card (DPC) restarted due to path monitor failure after QSFP28 disconnected from the Network Processing Card (NPC).
    PAN-232377
    Fixed an issue where the
    AddrObjRefresh
     job failed when the useridd process restarted.
    PAN-232358
    (
    PA-5450 firewalls only
    ) Fixed an issue where the interface on QSFP28 ports did not go down when the Tx cable was removed from the QSFP28 module.
    PAN-232250
    Fixed an issue where, when SSH service profiles for management access was set to
    None
    , the reported output was incorrect.
    PAN-231771
    Fixed an issue where the firewall issued /box/getserv/ requests with PAN-OS 7.1.0 and did not take device certificates.
    PAN-231698
    Fixed an issue where you were unable to set the Dynamic Updates schedule threshold to an empty value.
    PAN-231658
    Fixed an issue where DNS resolution failed when interfaces were configured as DHCP and a DNS server was provided via DHCP while also statically configured with DNS servers.
    PAN-231552
    Fixed an issue where traffic returning from a third-party Security chain was dropped.
    PAN-231459
    (
    PA-5450 firewalls only
    ) Fixed an issue where a large number of invalid source MAC addresses were shown in drop-stage packet captures.
    PAN-231422
    Fixed an issue where you were unable to configure more than 256 scheduled objects on the firewall.
    PAN-231329
    Fixed an issue where the logrcvr process stopped responding due to a corrupt log in the forwarding pipeline.
    PAN-230813
    Fixed an issue where flex memory leak caused decryption failure and commit failure with the error message
    Error preparing global objects failed to handle CONFIG_UPDATE_START
    .
    PAN-230656
    (
    Firewalls in HA configurations only
    ) Fixed an issue where a split brain condition occurred on both firewalls after booting up any firewall, and an HA switchover occurred after booting up a firewall with a higher HA priority even when no preemptive option was enabled on the firewall.
    PAN-230362
    Fixed an issue where the firewall truncated the payload of a TCP Out of Order segment with a FIN flag.
    PAN-230106
    Fixed an issue where the firewall was unable to retrieve the most current external dynamic list information from the server due to hostname resolution failure.
    PAN-230092
    Fixed an issue where the routed process stopped responding when committing routing-related changes if Advanced Routing was enabled.
    PAN-230039
    Fixed an issue where migrating from an Enterprise License Agreement (ELA) to a Flexible VM-Series License failed with a deactivation error message.
    PAN-229952
    Fixed an issue where the the
    print PDF
     option did not work (
    Panorama > Managed Devices > Health
    ).
    PAN-229315
    Fixed an issue where Octets in NetFlow records were always reported to be 0 despite having a non-zero packet count.
    PAN-229307
    Fixed an issue where half closed SSL decryption sessions stayed active, which caused software packet buffer depletion.
    PAN-229080
    Fixed an issue where the new management IP address on the interface did not take effect.
    PAN-229069
    Fixed an issue where clientless VPN portal users were unable to access clientless applications due to an SSL renegotiation being triggered.
    PAN-228820
    A CLI command was added to address an issue where long-lived sessions aged out even when there was ongoing traffic.
    PAN-228442
    Fixed an issue on firewalls in active/passive HA configurations where sessions did not fail over from the active firewall to the passive firewall when upgrading PAN-OS.
    PAN-228342
    Fixed an issue where objects in the running configuration appeared to be deleted under the push scope preview.
    PAN-228323
    Fixed an issue where a large number of Panorama management server cookies were created in the Redis database when the Cloud-Service plugin sent an authentication request every second, and logging in to or using Panorama was slower than expected.
    PAN-228277
    Fixed an issue where commits took longer than expected.
    PAN-228273
    (
    Panorama appliances in FIPS-CC mode only
    ) Fixed an issue where the Elasticsearch cluster did not come up, and the
    show log-collector-es-cluster health
     CLI command displayed the status as red. This caused log ingestion issues for Panorama appliances in Panorama mode or Log Collector mode.
    PAN-227804
    Fixed an issue where memory corruption caused the comm process to stop responding.
    PAN-227774
    Fixed an issue where commits failed with the error message
    Management server failed to send phase 1 to client logrcvr
    .
    PAN-227641
    Fixed an issue where
    Preview Changes
     and
    Change Summary
     when saving changes did not open a new window when clicked.
    PAN-227522
    Fixed an issue where
    shared
     application filters that had application object overrides were overwritten by predefined applications.
    PAN-227397
    Fixed an issue where selective pushes on Panorama removed a previously pushed configuration from the firewalls.
    PAN-227233
    Fixed an issue where the combination signature aggregation criteria in a Vulnerability Protection profile was incorrectly blank even though a value was set.
    PAN-227058
    Fixed an issue where traffic did not match Security policy rules with the destination as FQDN and instead hit the default deny rule.
    PAN-226935
    Fixed an issue where autocommits failed due to duplicate application name entries.
    PAN-226860
    Fixed an issue where macOS X-Auth clients disconnected prematurely from the GlobalProtect gateway during a Phase 2 re-key event.
    PAN-226768
    Fixed an issue where, when the GlobalProtect app was installed on iOS endpoints and the gateway was configured to accept cookies, the app remained in the
    Connecting
     stage after authentication, and the GlobalProtect log displayed the error message `User is not in allow list`. This occurred when the app was restarted or when the app attempted to reconnect after disconnection.
    PAN-226489
    Fixed an issue where Panorama was unable to push scheduled Dynamic Updates to firewalls with the error message
    Failed to add deploy job. Too many (30) deploy jobs pending for device
    .
    PAN-226418
    A CLI command was added to address an issue where long-lived sessions aged out even when there was ongoing traffic.
    PAN-226260
    Fixed an issue where support for CBC ciphers with some authentication algorithms was only available in FIPS mode.
    PAN-225920
    Fixed an issue where duplicate predict sessions did not release NAT resources.
    PAN-225228
    Fixed an issue where filtering Threat logs using any value under
    THREAT ID/NAME
     displayed the error
    Invalid term
    .
    PAN-225169
    Added a CLI command to view Cortex Data Lake queue usage.
    PAN-225110
    Fixed an issue with firewalls in HA configurations where HA configuration syncs did not complete or logging data was missing until firewall processes were manually restarted or the firewalls were rebooted.
    PAN-225082
    Fixed an issue where GlobalProtect quarantine-delete logs were incorrectly shown on passive firewalls.
    PAN-225013
    (
    PA-5450 firewalls only
    ) Fixed an issue where the firewall rebooted unexpectedly when a Network Card was on Slot 2 instead of a DPC.
    PAN-224955
    Fixed an issue where the devsrvr process stopped responding when zone protection had more than 255 profiles.
    PAN-224772
    Fixed a high memory usage issue with the mongodb process that caused an OOM condition.
    PAN-224656
    Fixed an issue where the devsrvr process caused delays when Dynamic Address Groups with large entry lists were being processed during a commit, which caused commits to take longer than expected.
    PAN-224405
    Fixed an issue where the distributord process repeatedly stopped responding.
    PAN-224354
    Fixed an issue where a memory leak related to the distributord process occurred when connections flapped for IP address-to-username mapping redistribution.
    PAN-224036
    (
    PA-5450 firewalls only
    ) Fixed an issue where a firewall with QoS configured wasn't able to send packets out of its interfaces after a reboot.
    PAN-223855
    Fixed an issue where the
    show running ippool
     CLI command output displayed incorrect used and available NAT IP address pools on DIPP NAT policy rules in multidataplane firewalls.
    PAN-223852
    Fixed an issue where all_pktproc stopped responding when network packet broker or decryption broker chains failed.
    PAN-223741
    Fixed an issue where the mprelay process stopped responding, which caused a slot restart when another slot rebooted.
    PAN-223481
    (
    PA-5450 firewalls only
    ) Fixed an issue where the all_pktproc process stopped responding when the firewall was on PAN-OS 10.1.9-h3 or a later release.
    PAN-223457
    Fixed an issue where, if the number of group queries exceeded the Okta rate limit threshold, the firewall cleared the cache for the groups.
    PAN-223271
    Fixed an issue where the file transfer of large zipped and compressed files had the App-ID
    unknown-tcp
    .
    PAN-223263
    Fixed an issue on the web interface where the system clock for
    Mexico_city
     was displayed in CDT instead of CST on the management dashboard.
    PAN-223259
    Fixed an issue where selective pushes failed with the error
    Failed to generate selective push configuration. Unable to retrieve last in-sync configuration for the device, either a push was never done or version is too old. Please try a full push
    .
    PAN-223094
    Fixed an issue where fragmented TCP traffic was dropped due to an IP address ID conflict over the SD-WAN tunnel.
    PAN-222941
    Fixed an issue where viewing the latest logs took longer than expected due to log indexer failures.
    PAN-222533
    (
    VM-Series firewalls on Microsoft Azure and Amazon Web Services (AWS) environments
    ) Added support for HA link monitoring and path monitoring.
    PAN-222500
    Fixed an issue where an old configuration unexpectedly merged during a push from Panorama.
    PAN-222418
    Fixed an issue where the firewall intermittently recorded a reconnection message to the authentication server as an error, even if no disconnection occurred.
    PAN-222253
    Fixed an issue on Panorama where policy rulebase reordering under
    View Rulebase by Groups
     (
    Policy
    <policy-rulebase>
    ) did not persist if you reordered the policy rulebase by dragging and dropping individual policy rules and then moved the entire tag group.
    PAN-222089
    Fixed an issue where you were unable to context switch from Panorama to the managed device.
    PAN-221938
    Fixed an issue with network packet broker sessions where the broker session and primary session timeouts were out of sync, which caused traffic drops if the broker session timed out when the primary session was still active.
    PAN-221857
    Fixed an issue where users were unable to log in to the GlobalProtect app using SAML authentication after upgrading to PAN-OS 10.2.3-h4, and the GlobalProtect logs displayed the following error message:
    Username from SAML SSO response is different from the input
    .
    PAN-221763
    Fixed an issue on the web interface where text overlapped when editing address and prefix values using Firefox.
    PAN-221577
    Fixed an issue where a static route for a branch or hub over the respective virtual interface wasn't installed in the routing table even when the tunnel to the branch or hub was active.
    PAN-221316
    Fixed an issue where the useridd process memory consumption increased significantly, which caused the process to stop responding and the device to restart.
    PAN-221208
    Fixed an issue where the tunnel monitor was unable to remain up when zone protection with Strict IP was enabled and NAT Traversal was applied.
    PAN-221003
    Fixed an issue where you were unable to uncheck firewalls in HA configurations from the device group when
    Group HA Peers
     was enabled.
    PAN-220790
    Fixed an issue where the reportd process stopped responding, which caused Panorama to restart.
    PAN-220659
    Fixed an issue on the firewall where scheduled antivirus updates failed when external dynamic lists were configured on the firewall.
    PAN-220640
    (
    PA-220 firewalls only
    ) Fixed an issue where the firewall CPU percentage was miscalculated, and the values that were displayed were incorrect.
    PAN-220180
    Fixed an issue where configured botnet reports (
    Monitor > Botnet
    ) weren’t generated.
    PAN-219813
    Fixed an issue where the configuration log displayed incorrect information after a multi-device group
    Validate-all
     operation.
    PAN-219768
    Fixed an issue where you were unable to filter data filtering logs with
    Threat ID/NAME
     for custom data patterns created over Panorama.
    PAN-219644
    Fixed an issue where firewalls that forwarded logs to a syslog server over TLS (
    Objects > Log Forwarding
    ) used the default Palo Alto Networks certificate instead of the configured custom certificate.
    PAN-219585
    Fixed an issue where enabling
    syslog-ng
     debugs from the root caused 100% disk utilization.
    PAN-219415
    Fixed an issue where BGP routes were installed in the routing table even when the option to install routes was disabled in the configuration.
    PAN-219300
    Fixed an issue where the task manager displayed only limited data.
    PAN-219260
    (
    M-Series appliances only
    ) Fixed an issue where the management interface flapped due to low memory reserved for kernel space.
    PAN-219241
    Fixed an issue where web content for a failed SAML login had readability and functionality issues for the GlobalProtect app.
    PAN-219137
    (
    CN-Series firewalls only
    ) Fixed an issue where firewalls did not upload files to the WildFire public cloud.
    PAN-218928
    Fixed an issue where the reportd process stopped responding after querying logs or generating ACC reports with some filters.
    PAN-218671
    Fixed an issue on Panorama where commits failed after downgrading the SD-WAN plugin.
    PAN-218611
    Fixed an issue where the device telemetry region wasn't updated on the firewall when pushed from the Panorama template stack.
    PAN-218555
    Fixed an issue where the firewall did not receive dynamic address updates pushed from Panorama during initial registration to Panorama.
    PAN-218352
    Fixed an issue where Panorama was slower than expected when WildFire deployment was scheduled every minute to a large number of devices.
    PAN-218331
    Fixed an issue where you were unable to export or download packet captures from the firewall when context switching from Panorama.
    PAN-218273
    Fixed an issue where TCP keepalive packets from the client to the server weren't forwarded when SSL decryption was enabled.
    PAN-218238
    Fixed an issue where you were unable to create a file exception (
    Monitor > Threat Log > Detailed Log view > Create Exception
    ), and the following error message was displayed:
    no antivirus profile corresponding to threat log
    .
    PAN-218119
    Fixed an issue where the firewall transmitted packets with an incorrect source MAC address during commit operations.
    PAN-217831
    Fixed an issue memory leak issue related to the logd process that occurred due to a sysd object not being released.
    PAN-217728
    Fixed an issue where uploading a certificate in a manual configuration option for SafenetHSM failed.
    PAN-217674
    Fixed an issue where RADIUS authentication failed when the destination route of the service route was configured with an IPv4 address with more than 14 characters.
    PAN-217541
    Fixed an issue where the useridd process stopped responding after a restart when HIP redistribution was enabled.
    PAN-217510
    Fixed an issue where inbound DHCP packets received by a DHCP client interface that weren’t addressed to itself were silently dropped instead of forwarded.
    PAN-217493
    Fixed an issue where superusers with read-only privileges were unable to view SCEP object configurations.
    PAN-217280
    Fixed an issue where, when Advanced Routing was enabled, the routed process stopped responding during booting up.
    PAN-217272
    Fixed an issue where the DNS proxy log included an excessive number of the following error message:
    Warning: pan_dnsproxy_log_resolve_fail: Failed to resolve domain name ** AAAA after trying all attempts to name servers
    PAN-217241
    Fixed an issue where predict session conversion failed for RTP and RTCP traffic.
    PAN-217064
    Fixed an issue where commits took longer than expected when the DLP plugin was configured.
    PAN-217024
    Fixed an issue where fetching device certificates failed for internal DNS servers with the error message
    ERROR Error: Could not resolve host: certificate.paloaltonetworks.com
    .
    PAN-216647
    Fixed an issue where the
    sysd
     node was updated at incorrect times.
    PAN-216214
    (
    Panorama managed firewalls in active/active HA configurations only
    ) Fixed an issue where the HA status displayed as
    Out of Sync
     (
    Panorama > Managed Devices > Health
    ) if local firewall configurations were made on one of the HA peers. This caused the next HA configuration sync to overwrite the local firewall configuration made on the HA peer.
    PAN-216101
    Fixed an issue where a memory leak related to a process and LLDP packet processing caused an OOM condition on the firewall.
    PAN-215857
    Fixed an issue where the option to reboot the entire firewall was visible to vsys admins.
    PAN-215583
    Fixed an issue on firewalls in HA configurations where the primary firewall went into a non-functional state due to a timeout in the
    pan_comm
     logs during the policy-based forwarding (PBF) parse, which caused an HA failover.
    PAN-215576
    Fixed an issue where the
    userID-Agent
     and
    TS-Agent
     certificates were set to expire on November 18, 2024. With this fix, the expiration date has been extended to January 2032.
    PAN-215436
    Fixed an issue with the web interface where the latest logs took longer than expected to display under
    Monitor
    .
    PAN-215082
    (
    M-300 and M-700 appliances only
    ) Fixed an issue where Panorama generated erroneous system logs (
    Monitor
    Logs
    System
    ) to alert that the appliance memory usage limit was reached.
    PAN-214987
    Fixed an issue where
    Application Filter
     names weren’t random, and they matched or included internal protocol names.
    PAN-214942
    Fixed an issue where SD-WAN UDP traffic failed over to a non-member path after a flap of an SD-WAN virtual interface.
    PAN-214847
    Fixed an issue where, when certificate authentication for admin user authentication was enabled, vulnerability scans that used usernames or passwords against the management interface reported a vulnerability due to a missing HSTS header in the
    Access Denied
     response page.
    PAN-214773
    Fixed an issue where RTP packets traversing intervsys were dropped on the outgoing vsys.
    PAN-214558
    Fixed an issue where overriding a Layer2/vwire subinterface on Panorama caused other subinterfaces to disappear.
    PAN-214336
    Fixed an issue where ICMPv6 unreachable messages were sent with an unspecified source address ( :: ) for VLAN interfaces.
    PAN-213956
    Fixed an issue where the firewall interface did not go down even after the peer link/switch port went down.
    PAN-213491
    Fixed an issue where the management CPU was high, which caused the web interface to be slower than expected.
    PAN-213173
    Fixed an issue where
    Preview Changes
     under
    Scheduled Pushes
     did not launch the
    Change Preview
     window.
    PAN-213112
    Fixed an issue where executing the
    show report directory-listing
     CLI command resulted in no output after upgrading to a PAN-OS 10.1 release.
    PAN-213103
    Fixed an issue where Clientless VPN access failed with the error message
    temporarily unavailable
     when accessing the Clientless VPN bookmarked application from the identity provider application portal.
    PAN-212932
    Fixed an issue where the firewall went into a restart loop with the following error message:
    failed to get mgt settings candidate: configured traffic quota of 0 MB is less than the minimum 32 MB
    .
    PAN-212877
    Fixed an issue where a race condition caused log flooding, which caused the firewall to go into an unresponsive state.
    PAN-212770
    Fixed an issue on the firewall where the WildFire file size limit value did not match on the web interface and the CLI.
    PAN-212580
    (
    PA-7050 firewalls only
    ) Fixed an issue where disk space filled up due to files under
    /opt/var/s8/lp/log/pan/
     not being properly deleted.
    PAN-211945
    Fixed an issue where URL Filtering system logs showed the error message
    CURL ERROR: bind failed with errno 124: Address family not supported by protocol
     even though the PAN-DB cloud was connected.
    PAN-211827
    Fixed an issue where Dynamic Updates failed with the following error message:
    CONFIG_UPDATE_INC: Incremental update to DP failed please try to commit force the latest config
    .
    PAN-211821
    Fixed an issue on firewalls in HA configurations where committing changes after disabling the QoS feature on multiple Aggregate Ethernet (AE) interfaces caused the dataplane to go down.
    PAN-211384
    Fixed an issue where the size of the
    redisthost_1
     in the Redis database continuously increased, which caused an OOM condition.
    PAN-210234
    Fixed a REST API call to query the template stack configuration did not return the template stack variables or device variables.
    PAN-208438
    Fixed an issue on Panorama where Security policy rules incorrectly displayed as disabled.
    PAN-208395
    Fixed an issue where user authentication failed in multi-vsys environments with the error message
    User is not in allowlist
     when an authentication profile was created in a shared configuration space.
    PAN-208085
    Fixed an issue where the BFD peers were deleted during a commit from Panorama. This occurred because the pan_comm thread became deadlocked due to the same sysd object was handled during the commit.
    PAN-207577
    Fixed an issue where
    Panorama > Setup > Interfaces
     wasn't accessible for users with custom admin roles even when the interface option was selected for the custom admin roles.
    PAN-207003
    Fixed an issue where the logrcvr process NetFlow buffer wasn't reset which resulted in duplicate NetFlow records.
    PAN-206325
    Fixed an issue where a renamed object was still referenced with the previous name in a Security policy rule, which caused commit failures when using
    edit
     API to create the rule.
    PAN-206041
    (
    PA-7050 firewalls only
    ) Fixed an issue where the ikemgr process stopped responding.
    PAN-204808
    (
    PA-400 Series, PA-1400 Series, PA-3400 Series, and PA-5400 Series firewalls only
    ) Fixed an issue where executing the CLI command
    show running resource-monitor ingress-backlogs
     displayed the error message
    Server error : Dataplane is not up or invalid target-dp(*.dp*)
    PAN-204663
    Fixed an issue on Panorama where you were unable to context switch from one managed firewall to another.
    PAN-202008
    Fixed an issue where Traffic logs exported to CSV files contained inaccuracies and weren’t complete.
    PAN-201269
    Fixed an issue where commits failed with the error message
    IPv6 addresses are not allowed because IPv6-firewalling is disabled
     when Security policy rules had an address group with more than 1000 FQDN address objects.
    PAN-198190
    (
    VM-Series firewalls only
    ) Fixed an issue where the MTU on the management interface couldn’t be configured to a value greater than 1500.
    PAN-197189
    Fixed an issue where the RST packet wasn't sent to the client when decrypted HTTP/2 traffic was detected by custom vulnerability signatures with action reset-both.
    PAN-196146
    (
    VM-Series firewalls only
    ) Fixed an issue where hostname validation failed due to the firewall not taking the hostname provided in
    init.cfg
    .
    PAN-193484
    Fixed an issue where DNS failed if the domain name started with a period.
    PAN-192318
    Fixed an issue where executing the CLI command
    show rule-hit-count device-group
     displayed the error message
    Server error : show rule hit count op-command failed
    .
    PAN-186957
    Fixed an issue where, in
    SAML Metadata Export
    , a drop-down did not appear in the input field when
    IP or Hostname
     was selected for
    Type
    .
    PAN-185286
    (
    PA-5400 Series firewalls only
    ) Fixed an issue on Panorama where device health resources did not populate.
    PAN-181706
    Fixed an issue where the logrcvr process stopped responding after upgrading to PAN-OS 10.1.
    PAN-179952
    Fixed an issue on Panorama where not all categories were displayed under
    Log settings
    .
    PAN-179260
    Fixed an issue where admins and other superusers were unable to remove a commit lock that was taken by another admin user with the format <domain/user>. As a result, deleting the commit lock failed.
    PAN-175642
    Fixed an issue where system logs to alert for support license expiry weren’t generated.
    PAN-98605
    Fixed an issue where audit comments did not appear in the audit comments archive.

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.