>
    PAN-OS 10.2.13 Addressed Issues
    Focus
    Download PDF
    Focus
    1. Home
    2. PAN-OS
    3. PAN-OS 10.2.13 Known and Addressed Issues
    4. PAN-OS 10.2.13 Addressed Issues
    Download PDF

    PAN-OS 10.2.13 Addressed Issues

    Table of Contents

    PAN-OS 10.2.13 Addressed Issues

    PAN-OSĀ® 10.2.13 addressed issues.
    Issue ID
    Description
    PAN-268823
    Fixed an issue where Monitor > Log Display did not display all logs when you applied a filter.
    PAN-268501
    Fixed an issue where the firewall was unable to generate a TSF file due to a full root partition.
    PAN-268339
    Fixed an issue where syslog-ng failed to start due to the syslog-ng.config file being corrupted when upgrading from PAN-OS 10.2.9-h1 to PAN-OS 10.2.11.
    PAN-267660
    Fixed an issue where UserID stopped working when the show object registered user CLI command was used with start-point and limit options.
    PAN-266698
    Fixed an issue where an email was able to be transferred to the destination MTA even when the firewall detected a suspicious file with a reset-bot action when it was encrypted by STARTTLS.
    PAN-266695
    Fixed an issue on Panorama where a cyclic nested address group configuration caused the configd process to stop responding after a commit.
    PAN-266427
    Fixed an issue on the firewall where, when a high number of SD-WAN branch sites or interfaces were not connected, SD-WAN processes and tund processes stopped responding due to a high probing rate.
    PAN-265963
    Fixed an issue where the escd process caused a memory leak when session resiliency was enabled on the firewall.
    PAN-265900
    Fixed an issue where the firewall stopped responding due to a tund process or SD-WAN process restart.
    PAN-265742
    Fixed an issue on the Panorama web interface where the OK button on the GlobalProtect gateway configuration dialog box was not clickable.
    PAN-265686
    Fixed an issue where the GlobalProtect portal logged passwords in cleartext.
    PAN-264249
    Fixed an issue on the firewall where SNMP queries timed out when using SNMP.
    PAN-264246
    Fixed an issue where the Authentication Portal did not work properly with session cookies when the request to the portal contained the header Sec-Fetch-Site=cross-site.
    PAN-263973
    Fixed an issue where log collectors had a low incoming log rate.
    PAN-263843
    (VM-Series firewalls only) Fixed an issue where the firewall received no-license packet buffers instead of memory based packet buffer numbers.
    PAN-263749
    Fixed an issue where disk space that was used by file descriptors was not freed, which caused the root partition to become full and Panorama to be inaccessible.
    PAN-263674
    (VM-Series firewalls in HA configurations only) Fixed an issue where the firewall rebooted due to multiple HA failovers.
    PAN-263291
    Fixed an issue where Microsoft Outlook did not work as expected when the GlobalProtect clientless VPN was configured.
    PAN-263287
    The PAN-COMMON-MIB.my file was updated to support new object identifiers (OID) to poll interface use via SNMP with table identifiers.
    PAN-263270
    Fixed an issue where, after a commit was performed from Strata Cloud Manager, the SD-WAN configuration containing BGP routes did not display on the hub firewall.
    PAN-262946
    Fixed an issue on the firewall where logging in via the CLI or web interface did not work due to increased memory usage.
    PAN-261936
    Fixed an issue where WildFire submission logs were not displayed when filtered by Sender Address.
    PAN-261673
    (VM-Series firewalls on Microsoft Azure environments only) Fixed an issue where, when Accelerated Networking was enabled, traffic was dropped because of the flow_parse_ip_hdr counter related to an Nvidia driver issue.
    PAN-261602
    Fixed an issue where GlobalProtect Decryption logs were not forwarded to Panorama.
    PAN-260842
    A CLI command was introduced to address an issue where TCP packets were out of order.
    PAN-260796
    Fixed an issue where servers were not accessible through an active SSL GlobalProtect VPN tunnel until a new connection was established or the session was cleared on the firewall.
    PAN-260752
    Fixed an issue where the firewall did not support TLSv1.3 in the Clientless VPN, which caused the portal page to not load.
    PAN-260604
    Fixed an issue where the firewall displayed inaccurate throughput utilization stats in NetFlow analyzer tools.
    PAN-260564
    Fixed an issue on firewalls in HA configurations where a network loop was detected by switches after suspending HA on the active firewall.
    PAN-260546
    (PA-440 firewalls only) Fixed an issue where the system clock reset to the epoch date and time after 8 to 12 weeks of shelf life or no power.
    PAN-260316
    Fixed an issue where the all_task process stopped responding and the firewall rebooted.
    PAN-260290
    Fixed an issue for fixed model licenses to support new content size requirements by reducing the total sessions supported to be equivalent to their flex memory counterpart
    PAN-260279
    Fixed an issue where selective push operations failed with the error message: Failed to generate selective push configuration. Schema validation failed. Please try a full push.
    PAN-259910
    Fixed an issue where the firewall reported the same value over consecutive SNMP polls when asynchronous mode was enabled.
    PAN-259870
    (PA-7000b firewalls only) Fixed an issue where Luna Network Hardware Security Modules (HSM) did not work after an upgrade or downgrade.
    PAN-259767
    Fixed an issue where GlobalProtect users were unable to connect when the option Block sessions if the certificate was not issued to the authenticating device was enabled in the certificate profile.
    PAN-259727
    (Panorama appliances in HA configurations only) Fixed an issue where Panorama became unresponsive and displayed a 504 gateway timeout error when accessing the web interface or the CLI.
    PAN-258996
    Fixed an issue where the firewall displayed the SFP ports as PowerDown when the SFP transceiver was removed and reinserted or the port was shut down and brought back up on the peer device.
    PAN-258912
    (PA-7000b firewalls only) Fixed an issue where the firewall web interface displayed an incorrect HSM client version when the client was upgraded to version 7.2.0.220.
    PAN-258166
    (PA-220 firewalls only) Fixed an issue where the root partition frequently reached 100%.
    PAN-257736
    (PA-5450 firewalls only) Fixed an issue where traffic to benign applications was was impacted by holding TCP sequential segments for MLC inspection and not releasing the full chain after a benign verdict was received.
    PAN-257601
    (PA-5450 firewalls only) Fixed an issue where Networking Cards (NC) experienced an internal link fault which caused path monitoring failure on the Dataplane Processing Card (DPC).
    PAN-257327
    (PA-5440 firewalls only) Fixed an issue where a failover event occurred unexpectedly on the firewall.
    PAN-256560
    Fixed an issue where exporting a Custom Report to CSV format did not display the full report if it contained non-ASCII characters.
    PAN-256115
    Fixed an issue where, after replacing a Panorama appliance or log collector, the secondary Panorama appliance or log collector displayed a disconnected status for the inter-log collector connection.
    PAN-255653
    Fixed an HA failover issue where, when Management Processing Card (MPC) or Base Card (BC) failures occurred, the HA link went down, which caused fpp-down events on one firewall.
    PAN-255190
    Fixed an issue where the TCP timeout value was reflected incorrectly when using application override for a custom application in TAP mode.
    PAN-253829
    Fixed an issue where the CLI command show running security-policy timed out when the Security policy was large.
    PAN-252300
    Fixed an issue where you were unable to select device groups in the push scope for user accounts.
    PAN-252270
    Fixed an issue on the firewall where changes were incorrectly applied after a reboot or a restart of the configd process.
    PAN-251385
    Fixed an issue where the configd process stopped responding when processing system logs.
    PAN-251035
    Fixed an issue where selective push operations did not push certificate changes to the firewall.
    PAN-250928
    (PA-5450 firewalls in active/active HA configurations only) Fixed an issue where firewall traffic was silently dropped when sent to the peer owner.
    PAN-250585
    Fixed an issue where the firewall CPU use increased after upgrading from PAN-OS 10.2.4-h4 to PAN-OS 10.2.8 due to a change in system resource reporting by the REST API.
    PAN-247857
    (PA-7050 firewalls in HA configurations only) Fixed an issue on the firewall where a dataplane process restarted when updating the routing table.
    PAN-247190
    (VM-Series firewalls only) Fixed an issue where the firewall was unable to connect to Panorama after manually uploading the license key.
    PAN-246699
    Fixed an issue on Panorama where Rule Usage and Apps Seen under Security policy rules stopped incrementing.
    PAN-244039
    (PA-5450 firewalls only) Fixed an issue where the firewall dropped packets when attempting to reuse a TCP session.
    PAN-243235
    Fixed an issue where Panorama stopped responding and rebooted repeatedly after an upgrade.
    PAN-242479
    Fixed an issue where a high number of packets caused high packet descriptors on the firewall when handling EtherIP traffic.
    PAN-241022
    Fixed an issue where rib-out routes were not displayed due to the next hop of BGP local routes not getting matched with export filters.
    PAN-241004
    Fixed an issue where DNS Proxy dropped client requests of the type ns for a root domain.
    PAN-240990
    Fixed an issue where l3svc.py displayed incorrect logs.
    PAN-239165
    Fixed an issue where adding an interface in a route filter resulted in an OSPF LSA Type-5 packet check failure, which caused redistributed routes to be removed.
    PAN-238610
    Fixed an issue with the Panorama Virtual Appliance where, after the mgmtsrvr restarted on the passive appliance, stale IP address tags were pushed to the connected firewalls with the message clear all registered ip addresses.
    PAN-237246
    Fixed an issue where the all_pktproc process repeatedly restarted, which caused the firewall to go into a nonfunctional state.
    PAN-233965
    Fixed an issue where the tund process stopped responding, which caused push operation to managed firewalls or making changes to local firewalls to fail.
    PAN-232530
    Fixed an issue where the useridd process ran out of memory and restarted when the number of user or user groups exceeded the threshold.
    PAN-229686
    Fixed an issue where eBGP remained in an idle state after disabling and enabling BGP configurations.
    PAN-229526
    Fixed an issue where the mprelay process stopped responding due to a netflow session refresh taking longer than expected to complete.
    PAN-224472
    Fixed an issue where the TCP timeout did not refresh for sessions using challenge-ACK, which caused the session to timeout.
    PAN-222590
    Fixed an issue where a semicolon appeared at the end of file names of data filtering logs.
    PAN-218873
    Fixed an issue where a HIP mask was reused when an existing IP address user mapping was updated by a new IP address user mapping that had a different username but the same IP address.
    PAN-218279
    Fixed an issue on Panorama where hostname variables displayed as unknown when exporting template or template stack variables in CSV format.
    PAN-214122
    Fixed an issue where the ikemgr process stopped responding when processing a high number of IKEv2 SA requests.
    PAN-195661
    Fixed an issue where the firewall did not insert the IP address tag into the dynamic address group after a device server restart, which caused traffic that matched the dynamic address group Security policy rule base failed.
    PAN-193285
    Fixed an issue where the policy optimizer feature did not add entries back to the mongodb database after removing them during an upgrade or downgrade.
    PAN-188998
    Fixed an issue where the firewall logged excessive SSL VPN debug information.

    © 2025 Palo Alto Networks, Inc. All rights reserved.